27 lines
976 B
Markdown
27 lines
976 B
Markdown
|
<br>
|
||
|
|
# Hold min SOC -> Optimize Self-Consumption
|
||
|
|
|
||
|
|
Initial State: `Hold min SOC`
|
||
|
|
Target State: `Optimize Self-Consumption`
|
||
|
|
|
||
|
|
## Test Procedure
|
||
|
|
|
||
|
|
1. `Min SOC` is set to slightly lower than the current SOC
|
||
|
|
2. `Min SOC` should be 50% or lower
|
||
|
|
3. `Grid setpoint` is set to a negative value -2000W
|
||
|
|
4. Wait until the system reaches the `Hold min SOC` state and discharging power falls below 1500W
|
||
|
|
5. `Grid setpoint` is set to a positive value: 2000W
|
||
|
|
|
||
|
|
## Expected Outcome
|
||
|
|
|
||
|
|
The system first settles into the `Hold min SOC` state.
|
||
|
|
As soon as the `Grid setpoint` is set to positive, the system changes into the `Optimize Self-Consumption` and
|
||
|
|
charges with ~2000W.
|
||
|
|
|
||
|
|
## Tested Outcome
|
||
|
|
|
||
|
|
While the system was on `Hold min SOC` state sitting on around 46% SOC, the `Grid setpoint` was set to a 2000W, the system
|
||
|
|
started charging with a power of around 1600W until around 70% SOC, then it started throtteling the charging power.
|
||
|
|
|
||
|
|
|