Innovenergy_trunk/firmware/Cerbo_Release/CerboReleaseFiles/rc.local

#!/bin/sh -e
mount -o remount,rw /

# Redirect all output to a log file
exec > /data/log/rc.local.log 2>&1
# Set root password non-interactively
echo "Setting root password..."
echo "root:salidomo" | /usr/sbin/chpasswd

# Check the exit status of chpasswd
if [ $? -eq 0 ]; then
    echo "Root password set successfully."
else
    echo "Failed to set root password."
fi

# Remove existing timezone link (if it exists)
if [ -L /etc/localtime ]; then
    echo "Removing existing timezone link..."
    rm /etc/localtime
fi

# Create a symbolic link to the desired timezone
echo "Creating symbolic link to timezone..."
ln -sf /usr/share/zoneinfo/Europe/Paris /etc/localtime

# Source directory
source_dir="/data/dbus-fzsonick-48tl"

# Destination directory
destination_dir_upper="/opt/victronenergy/"
destination_dir="/opt/victronenergy/dbus-fzsonick-48tl/"

# Check if the destination directory exists
if [ -d "$destination_dir" ]; then
    # Remove the destination directory
    rm -r "$destination_dir"
fi

# Copy the contents of the source directory to the destination directory
echo "Copying battery folder from /data to /opt/victronenergy/ ..."
cp -r "$source_dir" "$destination_dir_upper"

# Set MPPT network mode to 0
echo "Changing MPPT network mode to 0..."
sed -i "s|('/Link/NetworkMode', [^)]*)|('/Link/NetworkMode', 0)|g" /opt/victronenergy/dbus-systemcalc-py/delegates/dvcc.py

# Set aggregator service symlink
echo "Creating symbolic link to aggregator service..."
aggregator_service_path="/data/aggregator"
# aggregator_symlink_path="/opt/victronenergy/service"
aggregator_symlink_path="/service"
ln -s "$aggregator_service_path" "$aggregator_symlink_path"

# Set VPN service symlink
echo "Creating symbolic link to VPN service..."
find /data/innovenergy/openvpn -type f -exec chmod 777 {} \;
vpn_service_path="/data/innovenergy/openvpn/service"
# vpn_symlink_path="/opt/victronenergy/service/openvpn"
vpn_symlink_path="/service/openvpn"
ln -s "$vpn_service_path" "$vpn_symlink_path"

# # Set EmuMeter service symlink
# echo "Creating symbolic link to EmuMeter service..."
# EmuMeter_service_path="/data/EmuMeter/service"
# EmuMeter_symlink_path="/service/EmuMeter"
# ln -s "$EmuMeter_service_path" "$EmuMeter_symlink_path"


exit 0