Added Node Red folder

NodeRed/dbus-csv-files/config.py

@@ -0,0 +1,51 @@
+import serial
+import logging
+
+# dbus configuration
+
+FIRMWARE_VERSION = 1  # value returned by getValue (getText returns string value reported by battery)
+HARDWARE_VERSION = 1  # value returned by getValue (getText returns string value reported by battery)
+
+CONNECTION = 'Modbus RTU'
+PRODUCT_NAME = 'FZS 48TL200'
+PRODUCT_ID = 0xB012   # assigned by victron
+DEVICE_INSTANCE = 1
+SERVICE_NAME_PREFIX = 'com.victronenergy.battery.'
+
+
+# driver configuration
+
+SOFTWARE_VERSION = '3.0.3'
+UPDATE_INTERVAL = 2000   # milliseconds
+#LOG_LEVEL = logging.INFO
+LOG_LEVEL = logging.DEBUG
+
+# modbus configuration
+
+BASE_ADDRESS = 999
+#NO_OF_REGISTERS = 63
+NO_OF_REGISTERS = 64
+MAX_SLAVE_ADDRESS = 10
+
+
+# RS 485 configuration
+
+PARITY = serial.PARITY_ODD
+TIMEOUT = 0.1  # seconds
+BAUD_RATE = 115200
+BYTE_SIZE = 8
+STOP_BITS = 1
+MODE = 'rtu'
+
+
+# battery configuration
+
+MAX_CHARGE_VOLTAGE = 58
+I_MAX_PER_STRING = 15
+NUM_OF_STRING_PER_BATTERY = 5
+AH_PER_STRING = 40
+V_MAX = 54.2
+R_STRING_MIN = 0.125
+R_STRING_MAX = 0.250
+
+

NodeRed/dbus-csv-files/convert.py

@@ -0,0 +1,119 @@
+from collections import Iterable
+from decimal import *
+
+import config as cfg
+from data import LedState, BatteryStatus
+
+# trick the pycharm type-checker into thinking Callable is in scope, not used at runtime
+# noinspection PyUnreachableCode
+if False:
+	from typing import Callable
+
+
+def read_bool(register, bit):
+	# type: (int, int) -> Callable[[BatteryStatus], bool]
+
+	def get_value(status):
+		# type: (BatteryStatus) -> bool
+		value = status.modbus_data[register - cfg.BASE_ADDRESS]
+		return value & (1 << bit) > 0
+
+	return get_value
+
+
+def read_float(register, scale_factor=1.0, offset=0.0, places=2):
+	# type: (int, float, float) -> Callable[[BatteryStatus], float]
+
+	def get_value(status):
+		# type: (BatteryStatus) -> float
+		value = status.modbus_data[register - cfg.BASE_ADDRESS]
+
+		if value >= 0x8000:    # convert to signed int16
+			value -= 0x10000   # fiamm stores their integers signed AND with sign-offset @#%^&!
+
+		result = (value+offset)*scale_factor
+		return round(result,places)
+
+	return get_value
+
+
+def read_hex_string(register, count):
+	# type: (int, int) -> Callable[[BatteryStatus], str]
+	"""
+	reads count consecutive modbus registers from start_address,
+	and returns a hex representation of it:
+	e.g. for count=4: DEAD BEEF DEAD BEEF.
+	"""
+	start = register - cfg.BASE_ADDRESS
+	end = start + count
+
+	def get_value(status):
+		# type: (BatteryStatus) -> str
+		return ' '.join(['{0:0>4X}'.format(x) for x in status.modbus_data[start:end]])
+
+	return get_value
+
+
+def read_led_state(register, led):
+	# type: (int, int) -> Callable[[BatteryStatus], int]
+
+	read_lo = read_bool(register, led * 2)
+	read_hi = read_bool(register, led * 2 + 1)
+
+	def get_value(status):
+		# type: (BatteryStatus) -> int
+
+		lo = read_lo(status)
+		hi = read_hi(status)
+
+		if hi:
+			if lo:
+				return LedState.blinking_fast
+			else:
+				return LedState.blinking_slow
+		else:
+			if lo:
+				return LedState.on
+			else:
+				return LedState.off
+
+	return get_value
+
+
+def read_bitmap(register):
+		# type: (int) -> Callable[[BatteryStatus], bitmap]
+
+	def get_value(status):
+		# type: (BatteryStatus) -> bitmap
+		value = status.modbus_data[register - cfg.BASE_ADDRESS]
+		return value 
+
+	return get_value
+
+
+def append_unit(unit):
+	# type: (unicode) -> Callable[[unicode], unicode]
+
+	def get_text(v):
+		# type: (unicode) -> unicode
+		return "{0}{1}".format(str(v), unit)
+
+	return get_text
+
+
+def mean(numbers):
+	# type: (Iterable[float] | Iterable[int]) -> float
+	return float("{:.2f}".format(float(sum(numbers)) / len(numbers)))
+
+def ssum(numbers):
+	# type: (Iterable[float] | Iterable[int]) -> float
+	return float("{:.2f}".format(float(sum(numbers))))
+
+
+def first(ts):
+	return next(t for t in ts)
+
+def return_in_list(ts):
+	return ts
+
+

NodeRed/dbus-csv-files/data.py

@@ -0,0 +1,63 @@
+import config as cfg
+from collections import Iterable
+
+# trick the pycharm type-checker into thinking Callable is in scope, not used at runtime
+# noinspection PyUnreachableCode
+if False:
+	from typing import Callable
+
+
+class LedState(object):
+	"""
+	from page 6 of the '48TLxxx ModBus Protocol doc'
+	"""
+	off = 0
+	on = 1
+	blinking_slow = 2
+	blinking_fast = 3
+
+
+class LedColor(object):
+	green = 0
+	amber = 1
+	blue = 2
+	red = 3
+
+
+
+class CsvSignal(object):
+	def __init__(self, name, get_value, get_text = None):
+		self.name = name
+		self.get_value = get_value if callable(get_value) else lambda _: get_value
+		self.get_text = get_text
+
+		if get_text is None:
+			self.get_text = ""
+
+class Battery(object):
+
+	""" Data record to hold hardware and firmware specs of the battery """
+
+	def __init__(self, slave_address, hardware_version, firmware_version, bms_version, ampere_hours):
+		# type: (int, str, str, str, int) -> None
+		self.slave_address = slave_address
+		self.hardware_version = hardware_version
+		self.firmware_version = firmware_version
+		self.bms_version = bms_version
+		self.ampere_hours = ampere_hours
+
+
+	def __str__(self):
+		return 'slave address = {0}\nhardware version = {1}\nfirmware version = {2}\nbms version = {3}\nampere hours = {4}'.format(
+			self.slave_address, self.hardware_version, self.firmware_version, self.bms_version, str(self.ampere_hours))
+
+
+class BatteryStatus(object):
+	"""
+	record holding the current status of a battery
+	"""
+	def __init__(self, battery, modbus_data):
+		# type: (Battery, list[int]) -> None
+
+		self.battery = battery
+		self.modbus_data = modbus_data

NodeRed/dbus-csv-files/dbus-csv-files.py

@@ -0,0 +1,731 @@
+#! /usr/bin/python3 -u
+import re
+import sys
+import logging
+from gi.repository import GLib
+
+import config as cfg
+import convert as c
+
+from pymodbus.register_read_message import ReadInputRegistersResponse
+from pymodbus.client.sync import ModbusSerialClient as Modbus
+from pymodbus.other_message import ReportSlaveIdRequest
+from pymodbus.exceptions import ModbusException
+from pymodbus.pdu import ExceptionResponse
+
+from dbus.mainloop.glib import DBusGMainLoop
+from data import BatteryStatus, Battery, LedColor, CsvSignal, LedState
+
+from collections import Iterable
+from os import path
+
+app_dir = path.dirname(path.realpath(__file__))
+sys.path.insert(1, path.join(app_dir, 'ext', 'velib_python'))
+
+#from vedbus import VeDbusService as DBus
+
+import time
+import os
+import csv
+
+
+import requests
+import hmac
+import hashlib
+import base64
+from datetime import datetime
+import io
+
+class S3config:
+    def __init__(self):
+        self.bucket = "1-c0436b6a-d276-4cd8-9c44-1eae86cf5d0e"
+        self.region = "sos-ch-dk-2"
+        self.provider = "exo.io"
+        self.key = "EXOcc0e47a4c4d492888ff5a7f2"
+        self.secret = "79QG4unMh7MeVacMnXr5xGxEyAlWZDIdM-dg_nXFFr4"
+        self.content_type = "text/plain; charset=utf-8"
+
+    @property
+    def host(self):
+        return f"{self.bucket}.{self.region}.{self.provider}"
+
+    @property
+    def url(self):
+        return f"https://{self.host}"
+
+    def create_put_request(self, s3_path, data):
+        headers = self._create_request("PUT", s3_path)
+        url = f"{self.url}/{s3_path}"
+        response = requests.put(url, headers=headers, data=data)
+        return response
+
+    def _create_request(self, method, s3_path):
+        date = datetime.utcnow().strftime('%a, %d %b %Y %H:%M:%S GMT')
+        auth = self._create_authorization(method, self.bucket, s3_path, date, self.key, self.secret, self.content_type)
+        headers = {
+            "Host": self.host,
+            "Date": date,
+            "Authorization": auth,
+            "Content-Type": self.content_type
+        }
+        return headers
+
+    @staticmethod
+    def _create_authorization(method, bucket, s3_path, date, s3_key, s3_secret, content_type="", md5_hash=""):
+        payload = f"{method}\n{md5_hash}\n{content_type}\n{date}\n/{bucket.strip('/')}/{s3_path.strip('/')}"
+        signature = base64.b64encode(
+            hmac.new(s3_secret.encode(), payload.encode(), hashlib.sha1).digest()
+        ).decode()
+        return f"AWS {s3_key}:{signature}"
+
+def read_csv_as_string(file_path):
+    """
+    Reads a CSV file from the given path and returns its content as a single string.
+    """
+    try:
+        with open(file_path, 'r', encoding='utf-8') as file:
+            return file.read()
+    except FileNotFoundError:
+        print(f"Error: The file {file_path} does not exist.")
+        return None
+    except IOError as e:
+        print(f"IO error occurred: {str(e)}")
+        return None
+
+CSV_DIR = "/data/csv_files_service/"
+#CSV_DIR = "csv_files/"
+
+# Define the path to the file containing the installation name
+INSTALLATION_NAME_FILE = '/data/innovenergy/openvpn/installation-name'
+
+# trick the pycharm type-checker into thinking Callable is in scope, not used at runtime
+# noinspection PyUnreachableCode
+if False:
+	from typing import Callable
+
+def interpret_limb_bitmap(bitmap_value):
+	# The bit for string 1 also monitors all 5 strings: 0000 0000 means All 5 strings activated. 0000 0001 means string 1 disabled.
+	string1_disabled = int((bitmap_value & 0b00001) != 0)
+	string2_disabled = int((bitmap_value & 0b00010) != 0)
+	string3_disabled = int((bitmap_value & 0b00100) != 0)
+	string4_disabled = int((bitmap_value & 0b01000) != 0)
+	string5_disabled = int((bitmap_value & 0b10000) != 0)
+	n_limb_strings = string1_disabled+string2_disabled+string3_disabled+string4_disabled+string5_disabled
+	return n_limb_strings
+
+def create_csv_signals(firmware_version):
+	def read_power(status):
+		return int(read_current(status) * read_voltage(status))
+
+	read_voltage = c.read_float(register=999,  scale_factor=0.01, offset=0, places=2)
+	read_current = c.read_float(register=1000, scale_factor=0.01, offset=-10000, places=2)
+
+	read_limb_bitmap = c.read_bitmap(1059)
+
+	def string1_disabled(status):
+		bitmap_value = read_limb_bitmap(status)
+		return int((bitmap_value & 0b00001) != 0)
+
+	def string2_disabled(status):
+		bitmap_value = read_limb_bitmap(status)
+		return int((bitmap_value & 0b00010) != 0)
+
+	def string3_disabled(status):
+		bitmap_value = read_limb_bitmap(status)
+		return int((bitmap_value & 0b00100) != 0)
+
+	def string4_disabled(status):
+		bitmap_value = read_limb_bitmap(status)
+		return int((bitmap_value & 0b01000) != 0)
+
+	def string5_disabled(status):
+		bitmap_value = read_limb_bitmap(status)
+		return int((bitmap_value & 0b10000) != 0)
+
+
+	def limp_strings_value(status):
+		return interpret_limb_bitmap(read_limb_bitmap(status))
+
+	def calc_power_limit_imposed_by_voltage_limit(v, i, v_limit, r_int):
+		# type: (float, float, float, float) -> float
+
+		dv = v_limit - v
+		di = dv / r_int
+		p_limit = v_limit * (i + di)
+
+		return p_limit
+
+	def calc_power_limit_imposed_by_current_limit(v, i, i_limit, r_int):
+		# type: (float, float, float, float) -> float
+
+		di = i_limit - i
+		dv = di * r_int
+		p_limit = i_limit * (v + dv)
+
+		return p_limit
+
+	def calc_max_charge_power(status):
+		# type: (BatteryStatus) -> int
+		n_strings = cfg.NUM_OF_STRING_PER_BATTERY-limp_strings_value(status)
+		i_max = n_strings * cfg.I_MAX_PER_STRING
+		v_max = cfg.V_MAX
+		r_int_min = cfg.R_STRING_MIN / n_strings
+		r_int_max = cfg.R_STRING_MAX / n_strings
+
+		v = read_voltage(status)
+		i = read_current(status)
+
+		p_limits = [
+			calc_power_limit_imposed_by_voltage_limit(v, i, v_max,r_int_min),
+			calc_power_limit_imposed_by_voltage_limit(v, i, v_max, r_int_max),
+			calc_power_limit_imposed_by_current_limit(v, i, i_max, r_int_min),
+			calc_power_limit_imposed_by_current_limit(v, i, i_max, r_int_max),
+		]
+
+		p_limit = min(p_limits)     # p_limit is normally positive here (signed)
+		p_limit = max(p_limit, 0)   # charge power must not become negative
+
+		return int(p_limit)
+
+	def calc_max_discharge_power(status):
+		n_strings = cfg.NUM_OF_STRING_PER_BATTERY-limp_strings_value(status)
+		max_discharge_current = n_strings*cfg.I_MAX_PER_STRING
+		return int(max_discharge_current*read_voltage(status))
+
+	def return_led_state_blue(status):
+		led_state = c.read_led_state(register=1004, led=LedColor.blue)(status)
+		if led_state == LedState.blinking_fast or led_state == LedState.blinking_slow:
+			return "Blinking"
+		elif led_state == LedState.on:
+			return "On"
+		elif led_state == LedState.off:
+			return "Off"
+
+		return "Unknown"
+
+	def return_led_state_red(status):
+                led_state = c.read_led_state(register=1004, led=LedColor.red)(status)
+                if led_state == LedState.blinking_fast or led_state == LedState.blinking_slow:
+                        return "Blinking"
+                elif led_state == LedState.on:
+                        return "On"
+                elif led_state == LedState.off:
+                        return "Off"
+
+                return "Unknown"
+
+	def return_led_state_green(status):
+                led_state = c.read_led_state(register=1004, led=LedColor.green)(status)
+                if led_state == LedState.blinking_fast or led_state == LedState.blinking_slow:
+                        return "Blinking"
+                elif led_state == LedState.on:
+                        return "On"
+                elif led_state == LedState.off:
+                        return "Off"
+
+                return "Unknown"
+
+	def return_led_state_amber(status):
+                led_state = c.read_led_state(register=1004, led=LedColor.amber)(status)
+                if led_state == LedState.blinking_fast or led_state == LedState.blinking_slow:
+                        return "Blinking"
+                elif led_state == LedState.on:
+                        return "On"
+                elif led_state == LedState.off:
+                        return "Off"
+
+                return "Unknown"
+
+	total_current = c.read_float(register=1062, scale_factor=0.01, offset=-10000, places=1)
+
+	def read_total_current(status):
+		return total_current(status)
+
+	def read_heating_current(status):
+		return total_current(status) - read_current(status)
+
+	def read_heating_power(status):
+		return read_voltage(status) * read_heating_current(status)
+
+	soc_ah = c.read_float(register=1002, scale_factor=0.1, offset=-10000, places=1)
+
+	def read_soc_ah(status):
+		return soc_ah(status)
+
+	def hex_string_to_ascii(hex_string):
+    		# Ensure the hex_string is correctly formatted without spaces
+    		hex_string = hex_string.replace(" ", "")
+    		# Convert every two characters (a byte) in the hex string to ASCII
+    		ascii_string = ''.join([chr(int(hex_string[i:i+2], 16)) for i in range(0, len(hex_string), 2)])
+    		return ascii_string
+
+	battery_status_reader = c.read_hex_string(1060,2)
+
+	def read_eoc_reached(status):
+		battery_status_string = battery_status_reader(status)
+		#if hex_string_to_ascii(battery_status_string) == "EOC_":
+			#return True
+		#return False
+		return hex_string_to_ascii(battery_status_string) == "EOC_"
+
+	def read_serial_number(status):
+
+		serial_regs = [1055, 1056, 1057, 1058]
+		serial_parts = []
+
+		for reg in serial_regs:
+			# reading each register as a single hex value
+			hex_value_fun = c.read_hex_string(reg, 1)
+			hex_value = hex_value_fun(status)
+
+			# append without spaces and leading zeros stripped if any
+			serial_parts.append(hex_value.replace(' ', ''))
+
+		# concatenate all parts to form the full serial number
+		serial_number = ''.join(serial_parts).rstrip('0')
+
+		return serial_number
+
+	return [
+
+		CsvSignal('/Battery/Devices/FwVersion', firmware_version),
+		CsvSignal('/Battery/Devices/Dc/Power', read_power, 'W'),
+		CsvSignal('/Battery/Devices/Dc/Voltage', read_voltage, 'V'),
+		CsvSignal('/Battery/Devices/Soc', c.read_float(register=1053, scale_factor=0.1,  offset=0, places=1), '%'),
+		CsvSignal('/Battery/Devices/Temperatures/Cells/Average', c.read_float(register=1003, scale_factor=0.1,  offset=-400, places=1), 'C'),
+
+		CsvSignal('/Battery/Devices/Dc/Current', read_current, 'A'),
+		CsvSignal('/Battery/Devices/BusCurrent', read_total_current, 'A'),
+		CsvSignal('/Battery/Devices/CellsCurrent', read_current, 'A'),
+		CsvSignal('/Battery/Devices/HeatingCurrent', read_heating_current, 'A'),
+		CsvSignal('/Battery/Devices/HeatingPower', read_heating_power, 'W'),
+		CsvSignal('/Battery/Devices/SOCAh', read_soc_ah),
+
+		CsvSignal('/Battery/Devices/Leds/Blue',   return_led_state_blue),
+		CsvSignal('/Battery/Devices/Leds/Red',    return_led_state_red),
+		CsvSignal('/Battery/Devices/Leds/Green',  return_led_state_green),
+		CsvSignal('/Battery/Devices/Leds/Amber',  return_led_state_amber),
+
+		CsvSignal('/Battery/Devices/BatteryStrings/String1Active', string1_disabled),
+		CsvSignal('/Battery/Devices/BatteryStrings/String2Active', string2_disabled),
+		CsvSignal('/Battery/Devices/BatteryStrings/String3Active', string3_disabled),
+		CsvSignal('/Battery/Devices/BatteryStrings/String4Active', string4_disabled),
+		CsvSignal('/Battery/Devices/BatteryStrings/String5Active', string5_disabled),
+
+		CsvSignal('/Battery/Devices/IoStatus/ConnectedToDcBus',       c.read_bool(register=1013, bit=0)),
+		CsvSignal('/Battery/Devices/IoStatus/AlarmOutActive',         c.read_bool(register=1013, bit=1)),
+		CsvSignal('/Battery/Devices/IoStatus/InternalFanActive',      c.read_bool(register=1013, bit=2)),
+		CsvSignal('/Battery/Devices/IoStatus/VoltMeasurementAllowed', c.read_bool(register=1013, bit=3)),
+		CsvSignal('/Battery/Devices/IoStatus/AuxRelayBus',            c.read_bool(register=1013, bit=4)),
+		CsvSignal('/Battery/Devices/IoStatus/RemoteStateActive',      c.read_bool(register=1013, bit=5)),
+		CsvSignal('/Battery/Devices/IoStatus/RiscActive',             c.read_bool(register=1013, bit=6)),
+
+
+		CsvSignal('/Battery/Devices/Eoc', read_eoc_reached),
+		CsvSignal('/Battery/Devices/SerialNumber', read_serial_number),
+		CsvSignal('/Battery/Devices/TimeSinceTOC', c.read_float(register=1052)),
+		CsvSignal('/Battery/Devices/MaxChargePower',     calc_max_charge_power),
+		CsvSignal('/Battery/Devices/MaxDischargePower',     calc_max_discharge_power),
+
+		# Warnings
+		CsvSignal('/Battery/Devices/WarningFlags/TaM1',    c.read_bool(register=1005, bit=1)),
+		CsvSignal('/Battery/Devices/WarningFlags/TbM1',    c.read_bool(register=1005, bit=4)),
+		CsvSignal('/Battery/Devices/WarningFlags/VBm1',    c.read_bool(register=1005, bit=6)),
+		CsvSignal('/Battery/Devices/WarningFlags/VBM1',    c.read_bool(register=1005, bit=8)),
+		CsvSignal('/Battery/Devices/WarningFlags/IDM1',    c.read_bool(register=1005, bit=10)),
+		CsvSignal('/Battery/Devices/WarningFlags/vsm1',    c.read_bool(register=1005, bit=22)),
+		CsvSignal('/Battery/Devices/WarningFlags/vsM1',    c.read_bool(register=1005, bit=24)),
+		CsvSignal('/Battery/Devices/WarningFlags/iCM1',    c.read_bool(register=1005, bit=26)),
+		CsvSignal('/Battery/Devices/WarningFlags/iDM1',    c.read_bool(register=1005, bit=28)),
+		CsvSignal('/Battery/Devices/WarningFlags/MID1',    c.read_bool(register=1005, bit=30)),
+		CsvSignal('/Battery/Devices/WarningFlags/BLPW',    c.read_bool(register=1005, bit=32)),
+		CsvSignal('/Battery/Devices/WarningFlags/CCBF',    c.read_bool(register=1005, bit=33)),
+		CsvSignal('/Battery/Devices/WarningFlags/Ah_W',    c.read_bool(register=1005, bit=35)),
+		CsvSignal('/Battery/Devices/WarningFlags/MPMM',    c.read_bool(register=1005, bit=38)),
+		CsvSignal('/Battery/Devices/WarningFlags/TCdi',    c.read_bool(register=1005, bit=40)),
+		CsvSignal('/Battery/Devices/WarningFlags/LMPW',    c.read_bool(register=1005, bit=44)),
+		CsvSignal('/Battery/Devices/WarningFlags/TOCW',    c.read_bool(register=1005, bit=47)),
+		CsvSignal('/Battery/Devices/WarningFlags/BUSL',    c.read_bool(register=1005, bit=49)),
+
+		# Alarms
+		CsvSignal('/Battery/Devices/AlarmFlags/Tam',     c.read_bool(register=1005, bit=0)),
+		CsvSignal('/Battery/Devices/AlarmFlags/TaM2',    c.read_bool(register=1005, bit=2)),
+		CsvSignal('/Battery/Devices/AlarmFlags/Tbm',     c.read_bool(register=1005, bit=3)),
+		CsvSignal('/Battery/Devices/AlarmFlags/TbM2',    c.read_bool(register=1005, bit=5)),
+		CsvSignal('/Battery/Devices/AlarmFlags/VBm2',    c.read_bool(register=1005, bit=7)),
+		CsvSignal('/Battery/Devices/AlarmFlags/VBM2',    c.read_bool(register=1005, bit=9)),
+		CsvSignal('/Battery/Devices/AlarmFlags/IDM2',    c.read_bool(register=1005, bit=11)),
+		CsvSignal('/Battery/Devices/AlarmFlags/ISOB',    c.read_bool(register=1005, bit=12)),
+		CsvSignal('/Battery/Devices/AlarmFlags/MSWE',    c.read_bool(register=1005, bit=13)),
+		CsvSignal('/Battery/Devices/AlarmFlags/FUSE',    c.read_bool(register=1005, bit=14)),
+		CsvSignal('/Battery/Devices/AlarmFlags/HTRE',    c.read_bool(register=1005, bit=15)),
+		CsvSignal('/Battery/Devices/AlarmFlags/TCPE',    c.read_bool(register=1005, bit=16)),
+		CsvSignal('/Battery/Devices/AlarmFlags/STRE',    c.read_bool(register=1005, bit=17)),
+		CsvSignal('/Battery/Devices/AlarmFlags/CME',     c.read_bool(register=1005, bit=18)),
+		CsvSignal('/Battery/Devices/AlarmFlags/HWFL',    c.read_bool(register=1005, bit=19)),
+		CsvSignal('/Battery/Devices/AlarmFlags/HWEM',    c.read_bool(register=1005, bit=20)),
+		CsvSignal('/Battery/Devices/AlarmFlags/ThM',     c.read_bool(register=1005, bit=21)),
+		CsvSignal('/Battery/Devices/AlarmFlags/vsm2',    c.read_bool(register=1005, bit=23)),
+		CsvSignal('/Battery/Devices/AlarmFlags/vsM2',    c.read_bool(register=1005, bit=25)),
+		CsvSignal('/Battery/Devices/AlarmFlags/iCM2',    c.read_bool(register=1005, bit=27)),
+		CsvSignal('/Battery/Devices/AlarmFlags/iDM2',    c.read_bool(register=1005, bit=29)),
+		CsvSignal('/Battery/Devices/AlarmFlags/MID2',    c.read_bool(register=1005, bit=31)),
+		CsvSignal('/Battery/Devices/AlarmFlags/HTFS',    c.read_bool(register=1005, bit=42)),
+		CsvSignal('/Battery/Devices/AlarmFlags/DATA',    c.read_bool(register=1005, bit=43)),
+		CsvSignal('/Battery/Devices/AlarmFlags/LMPA',    c.read_bool(register=1005, bit=45)),
+		CsvSignal('/Battery/Devices/AlarmFlags/HEBT',    c.read_bool(register=1005, bit=46)),
+		CsvSignal('/Battery/Devices/AlarmFlags/CURM',    c.read_bool(register=1005, bit=48)),
+
+		]
+
+def init_modbus(tty):
+	# type: (str) -> Modbus
+
+	logging.debug('initializing Modbus')
+
+	return Modbus(
+		port='/dev/' + tty,
+		method=cfg.MODE,
+		baudrate=cfg.BAUD_RATE,
+		stopbits=cfg.STOP_BITS,
+		bytesize=cfg.BYTE_SIZE,
+		timeout=cfg.TIMEOUT,
+		parity=cfg.PARITY)
+
+def read_modbus_registers(modbus, slave_address, base_address=cfg.BASE_ADDRESS, count=cfg.NO_OF_REGISTERS):
+	# type: (Modbus, int) -> ReadInputRegistersResponse
+
+	logging.debug('requesting modbus registers {0}-{1}'.format(base_address, base_address + count))
+
+	return modbus.read_input_registers(
+		address=base_address,
+		count=count,
+		unit=slave_address)
+
+def read_firmware_version(modbus, slave_address):
+	# type: (Modbus, int) -> str
+
+	logging.debug('reading firmware version')
+
+	try:
+		modbus.connect()
+
+		response = read_modbus_registers(modbus, slave_address, base_address=1054, count=1)
+		register = response.registers[0]
+
+		return '{0:0>4X}'.format(register)
+
+	finally:
+		modbus.close()  # close in any case
+
+def init_main_loop():
+	# type: () -> DBusGMainLoop
+	logging.debug('initializing DBusGMainLoop Loop')
+	DBusGMainLoop(set_as_default=True)
+	return GLib.MainLoop()
+
+def report_slave_id(modbus, slave_address):
+	# type: (Modbus, int) -> str
+
+	slave = str(slave_address)
+
+	logging.debug('requesting slave id from node ' + slave)
+
+	try:
+
+		modbus.connect()
+
+		request = ReportSlaveIdRequest(unit=slave_address)
+		response = modbus.execute(request)
+
+		if response is ExceptionResponse or issubclass(type(response), ModbusException):
+			raise Exception('failed to get slave id from ' + slave + ' : ' + str(response))
+
+		return response.identifier
+
+	finally:
+		modbus.close()
+
+def parse_slave_id(modbus, slave_address):
+	# type: (Modbus, int) -> (str, str, int)
+
+	slave_id = report_slave_id(modbus, slave_address)
+
+	sid = re.sub(b'[^\x20-\x7E]', b'', slave_id)  # remove weird special chars
+
+	match = re.match('(?P<hw>48TL(?P<ah>\d+)) *(?P<bms>.*)', sid.decode('ascii'))
+
+	if match is None:
+		raise Exception('no known battery found')
+
+	return match.group('hw'), match.group('bms'), int(match.group('ah'))
+
+
+def identify_battery(modbus, slave_address):
+	# type: (Modbus, int) -> Battery
+
+	logging.info('identifying battery...')
+
+	hardware_version, bms_version, ampere_hours = parse_slave_id(modbus, slave_address)
+	firmware_version = read_firmware_version(modbus, slave_address)
+
+	specs = Battery(
+		slave_address=slave_address,
+		hardware_version=hardware_version,
+		firmware_version=firmware_version,
+		bms_version=bms_version,
+		ampere_hours=ampere_hours)
+
+	logging.info('battery identified:\n{0}'.format(str(specs)))
+
+	return specs
+
+def identify_batteries(modbus):
+	# type: (Modbus) -> list[Battery]
+
+	def _identify_batteries():
+		address_range = range(1, cfg.MAX_SLAVE_ADDRESS + 1)
+
+		for slave_address in address_range:
+			try:
+				yield identify_battery(modbus, slave_address)
+			except Exception as e:
+				logging.info('failed to identify battery at {0} : {1}'.format(str(slave_address), str(e)))
+
+	return list(_identify_batteries())  # force that lazy iterable!
+
+def read_modbus_registers(modbus, slave_address, base_address=cfg.BASE_ADDRESS, count=cfg.NO_OF_REGISTERS):
+	# type: (Modbus, int) -> ReadInputRegistersResponse
+
+	logging.debug('requesting modbus registers {0}-{1}'.format(base_address, base_address + count))
+
+	return modbus.read_input_registers(
+		address=base_address,
+		count=count,
+		unit=slave_address)
+
+def read_battery_status(modbus, battery):
+	# type: (Modbus, Battery) -> BatteryStatus
+	"""
+	Read the modbus registers containing the battery's status info.
+	"""
+
+	logging.debug('reading battery status')
+
+	try:
+		modbus.connect()
+		data = read_modbus_registers(modbus, battery.slave_address)
+		return BatteryStatus(battery, data.registers)
+
+	finally:
+		modbus.close()  # close in any case
+
+def get_installation_name(file_path):
+	with open(file_path, 'r') as file:
+		return file.read().strip()
+
+def manage_csv_files(directory_path, max_files=20):
+    csv_files = [f for f in os.listdir(directory_path)]
+    csv_files.sort(key=lambda x: os.path.getctime(os.path.join(directory_path, x)))
+
+    # Remove oldest files if exceeds maximum
+    while len(csv_files) > max_files:
+        file_to_delete = os.path.join(directory_path, csv_files.pop(0))
+        os.remove(file_to_delete)
+
+def serialize_for_csv(value):
+	if isinstance(value, (dict, list, tuple)):
+		return json.dumps(value, ensure_ascii=False)
+	return str(value)
+
+def insert_id(path, id_number):
+	parts = path.split("/")
+
+	insert_position = parts.index("Devices") + 1
+
+	parts.insert(insert_position, str(id_number))
+
+	return "/".join(parts)
+
+def create_csv_files(signals, statuses, node_numbers):
+	timestamp = int(time.time())
+	if timestamp % 2 != 0:
+		timestamp -= 1
+	# Create CSV directory if it doesn't exist
+	if not os.path.exists(CSV_DIR):
+		os.makedirs(CSV_DIR)
+
+	#installation_name = get_installation_name(INSTALLATION_NAME_FILE)
+	csv_filename = f"{timestamp}.csv"
+	csv_path = os.path.join(CSV_DIR, csv_filename)
+
+	# Append values to the CSV file
+	with open(csv_path, 'a', newline='') as csvfile:
+		csv_writer = csv.writer(csvfile, delimiter=';')
+
+		# Add a special row for the nodes configuration
+		nodes_config_path = "/Config/Devices/BatteryNodes"
+		nodes_list = ",".join(str(node) for node in node_numbers)
+		config_row = [nodes_config_path, nodes_list, ""]
+		csv_writer.writerow(config_row)
+
+		# Iterate over each node and signal to create rows in the new format
+		for i, node in enumerate(node_numbers):
+			for s in signals:
+				signal_name = insert_id(s.name, i+1)
+				#value = serialize_for_csv(s.get_value(statuses[i]))
+				value = s.get_value(statuses[i])
+				row_values = [signal_name, value, s.get_text]
+				csv_writer.writerow(row_values)
+
+	# Manage CSV files, keep a limited number of files
+
+	# Create the CSV as a string
+	csv_data = read_csv_as_string(csv_path)
+
+
+	# Create an S3config instance
+	s3_config = S3config()
+	response = s3_config.create_put_request(csv_filename, csv_data)
+
+	if response.status_code == 200:
+		os.remove(csv_path)
+		print("Success")
+	else:
+		failed_dir = os.path.join(CSV_DIR, "failed")
+		if not os.path.exists(failed_dir):
+			os.makedirs(failed_dir)
+		failed_path = os.path.join(failed_dir, csv_filename)
+		os.rename(csv_path, failed_path)
+		print("Uploading failed")
+		manage_csv_files(failed_dir, 10)
+
+
+	manage_csv_files(CSV_DIR)
+
+def update(modbus, batteries, csv_signals):
+	# type: (Modbus, Iterable[Battery], DBus, Iterable[Signal]) -> bool
+
+	"""
+	Main update function
+
+	1. requests status record each battery via modbus,
+	2. parses the data using Signal.get_value
+	3. aggregates the data from all batteries into one datum using Signal.aggregate
+	4. publishes the data on the dbus
+	"""
+
+	logging.debug('starting update cycle')
+
+	statuses = [read_battery_status(modbus, battery) for battery in batteries]
+	node_numbers = [battery.slave_address for battery in batteries]
+
+	create_csv_files(csv_signals, statuses, node_numbers)
+
+	logging.debug('finished update cycle\n')
+	return True
+
+def print_usage():
+	print ('Usage:   ' + __file__ + ' <serial device>')
+	print ('Example: ' + __file__ + ' ttyUSB0')
+
+
+def parse_cmdline_args(argv):
+	# type: (list[str]) -> str
+
+	if len(argv) == 0:
+		logging.info('missing command line argument for tty device')
+		print_usage()
+		sys.exit(1)
+
+	return argv[0]
+
+
+alive = True   # global alive flag, watchdog_task clears it, update_task sets it
+
+def create_update_task(modbus, batteries, csv_signals, main_loop):
+	# type: (Modbus, DBus, Iterable[Battery], Iterable[Signal], DBusGMainLoop) -> Callable[[],bool]
+	"""
+	Creates an update task which runs the main update function
+	and resets the alive flag
+	"""
+
+	def update_task():
+		# type: () -> bool
+
+		global alive
+
+		alive = update(modbus, batteries, csv_signals)
+
+		if not alive:
+			logging.info('update_task: quitting main loop because of error')
+			main_loop.quit()
+
+		return alive
+
+	return update_task
+
+def create_watchdog_task(main_loop):
+	# type: (DBusGMainLoop) -> Callable[[],bool]
+	"""
+	Creates a Watchdog task that monitors the alive flag.
+	The watchdog kills the main loop if the alive flag is not periodically reset by the update task.
+	Who watches the watchdog?
+	"""
+	def watchdog_task():
+		# type: () -> bool
+
+		global alive
+
+		if alive:
+			logging.debug('watchdog_task: update_task is alive')
+			alive = False
+			return True
+		else:
+			logging.info('watchdog_task: killing main loop because update_task is no longer alive')
+			main_loop.quit()
+			return False
+
+	return watchdog_task
+
+
+def main(argv):
+	# type: (list[str]) -> ()
+	print("PAME")
+	logging.basicConfig(level=cfg.LOG_LEVEL)
+	logging.info('starting ' + __file__)
+
+	tty = parse_cmdline_args(argv)
+	modbus = init_modbus(tty)
+
+	batteries = identify_batteries(modbus)
+
+	n = len(batteries)
+
+	logging.info('found ' + str(n) + (' battery' if n == 1 else ' batteries'))
+
+	if n <= 0:
+		sys.exit(2)
+
+	bat = c.first(batteries)  # report hw and fw version of first battery found
+
+	csv_signals = create_csv_signals(bat.firmware_version)
+
+	main_loop = init_main_loop()      # must run before init_dbus because gobject does some global magic
+
+	# we do not use dbus this time. we only want modbus
+	update_task = create_update_task(modbus, batteries, csv_signals, main_loop)
+	watchdog_task = create_watchdog_task(main_loop)
+
+	GLib.timeout_add(cfg.UPDATE_INTERVAL * 2, watchdog_task)  # add watchdog first
+	GLib.timeout_add(cfg.UPDATE_INTERVAL, update_task)        # call update once every update_interval
+
+	logging.info('starting GLib.MainLoop')
+	main_loop.run()
+	logging.info('GLib.MainLoop was shut down')
+
+	sys.exit(0xFF)  # reaches this only on error
+
+
+if __name__ == "__main__":
+	main(sys.argv[1:])

NodeRed/dbus-csv-files/start.sh

@@ -0,0 +1,7 @@
+#!/bin/bash
+
+. /opt/victronenergy/serial-starter/run-service.sh
+
+app=/opt/victronenergy/dbus-csv-files/dbus-csv-files.py
+args="$tty"
+start $args

NodeRed/dbus-fzsonick-48tl/config.py

@@ -0,0 +1,51 @@
+import serial
+import logging
+
+# dbus configuration
+
+FIRMWARE_VERSION = 1  # value returned by getValue (getText returns string value reported by battery)
+HARDWARE_VERSION = 1  # value returned by getValue (getText returns string value reported by battery)
+
+CONNECTION = 'Modbus RTU'
+PRODUCT_NAME = 'FZS 48TL200'
+PRODUCT_ID = 0xB012   # assigned by victron
+DEVICE_INSTANCE = 1
+SERVICE_NAME_PREFIX = 'com.victronenergy.battery.'
+
+
+# driver configuration
+
+SOFTWARE_VERSION = '3.0.3'
+UPDATE_INTERVAL = 2000   # milliseconds
+#LOG_LEVEL = logging.INFO
+LOG_LEVEL = logging.DEBUG
+
+# modbus configuration
+
+BASE_ADDRESS = 999
+#NO_OF_REGISTERS = 63
+NO_OF_REGISTERS = 64
+MAX_SLAVE_ADDRESS = 10
+
+
+# RS 485 configuration
+
+PARITY = serial.PARITY_ODD
+TIMEOUT = 0.1  # seconds
+BAUD_RATE = 115200
+BYTE_SIZE = 8
+STOP_BITS = 1
+MODE = 'rtu'
+
+
+# battery configuration
+
+MAX_CHARGE_VOLTAGE = 58
+I_MAX_PER_STRING = 15
+NUM_OF_STRING_PER_BATTERY = 5
+AH_PER_STRING = 40
+V_MAX = 54.2
+R_STRING_MIN = 0.125
+R_STRING_MAX = 0.250
+
+

NodeRed/dbus-fzsonick-48tl/convert.py

@@ -0,0 +1,119 @@
+from collections import Iterable
+from decimal import *
+
+import config as cfg
+from data import LedState, BatteryStatus
+
+# trick the pycharm type-checker into thinking Callable is in scope, not used at runtime
+# noinspection PyUnreachableCode
+if False:
+	from typing import Callable
+
+
+def read_bool(register, bit):
+	# type: (int, int) -> Callable[[BatteryStatus], bool]
+
+	def get_value(status):
+		# type: (BatteryStatus) -> bool
+		value = status.modbus_data[register - cfg.BASE_ADDRESS]
+		return value & (1 << bit) > 0
+
+	return get_value
+
+
+def read_float(register, scale_factor=1.0, offset=0.0, places=2):
+	# type: (int, float, float) -> Callable[[BatteryStatus], float]
+
+	def get_value(status):
+		# type: (BatteryStatus) -> float
+		value = status.modbus_data[register - cfg.BASE_ADDRESS]
+
+		if value >= 0x8000:    # convert to signed int16
+			value -= 0x10000   # fiamm stores their integers signed AND with sign-offset @#%^&!
+
+		result = (value+offset)*scale_factor
+		return round(result,places)
+
+	return get_value
+
+
+def read_hex_string(register, count):
+	# type: (int, int) -> Callable[[BatteryStatus], str]
+	"""
+	reads count consecutive modbus registers from start_address,
+	and returns a hex representation of it:
+	e.g. for count=4: DEAD BEEF DEAD BEEF.
+	"""
+	start = register - cfg.BASE_ADDRESS
+	end = start + count
+
+	def get_value(status):
+		# type: (BatteryStatus) -> str
+		return ' '.join(['{0:0>4X}'.format(x) for x in status.modbus_data[start:end]])
+
+	return get_value
+
+
+def read_led_state(register, led):
+	# type: (int, int) -> Callable[[BatteryStatus], int]
+
+	read_lo = read_bool(register, led * 2)
+	read_hi = read_bool(register, led * 2 + 1)
+
+	def get_value(status):
+		# type: (BatteryStatus) -> int
+
+		lo = read_lo(status)
+		hi = read_hi(status)
+
+		if hi:
+			if lo:
+				return LedState.blinking_fast
+			else:
+				return LedState.blinking_slow
+		else:
+			if lo:
+				return LedState.on
+			else:
+				return LedState.off
+
+	return get_value
+
+
+def read_bitmap(register):
+		# type: (int) -> Callable[[BatteryStatus], bitmap]
+
+	def get_value(status):
+		# type: (BatteryStatus) -> bitmap
+		value = status.modbus_data[register - cfg.BASE_ADDRESS]
+		return value 
+
+	return get_value
+
+
+def append_unit(unit):
+	# type: (unicode) -> Callable[[unicode], unicode]
+
+	def get_text(v):
+		# type: (unicode) -> unicode
+		return "{0}{1}".format(str(v), unit)
+
+	return get_text
+
+
+def mean(numbers):
+	# type: (Iterable[float] | Iterable[int]) -> float
+	return float("{:.2f}".format(float(sum(numbers)) / len(numbers)))
+
+def ssum(numbers):
+	# type: (Iterable[float] | Iterable[int]) -> float
+	return float("{:.2f}".format(float(sum(numbers))))
+
+
+def first(ts):
+	return next(t for t in ts)
+
+def return_in_list(ts):
+	return ts
+
+

NodeRed/dbus-fzsonick-48tl/data.py

@@ -0,0 +1,97 @@
+import config as cfg
+from collections import Iterable
+
+# trick the pycharm type-checker into thinking Callable is in scope, not used at runtime
+# noinspection PyUnreachableCode
+if False:
+	from typing import Callable
+
+
+class LedState(object):
+	"""
+	from page 6 of the '48TLxxx ModBus Protocol doc'
+	"""
+	off = 0
+	on = 1
+	blinking_slow = 2
+	blinking_fast = 3
+
+
+class LedColor(object):
+	green = 0
+	amber = 1
+	blue = 2
+	red = 3
+
+
+
+class CsvSignal(object):
+	def __init__(self, name, get_value, get_text = None):
+		self.name = name
+		self.get_value = get_value if callable(get_value) else lambda _: get_value
+		self.get_text = get_text
+
+		if get_text is None:
+			self.get_text = ""
+
+class Signal(object):
+
+	def __init__(self, dbus_path, aggregate, get_value, get_text=None):
+		# type: (str, Callable[[Iterable[object]],object], Callable[[BatteryStatus],object] | object, Callable[[object],unicode] | object)->None
+		"""
+		A Signal holds all information necessary for the handling of a
+		certain datum (e.g. voltage) published by the battery.
+
+		:param dbus_path: str
+			object_path on DBus where the datum needs to be published
+
+		:param aggregate: Iterable[object] -> object
+			function that combines the values of multiple batteries into one.
+			e.g. sum for currents, or mean for voltages
+
+		:param get_value: (BatteryStatus) -> object
+			function to extract the datum from the modbus record,
+			alternatively: a constant
+
+		:param get_text: (object) -> unicode [optional]
+			function to render datum to text, needed by DBus
+			alternatively: a constant
+		"""
+
+		self.dbus_path = dbus_path
+		self.aggregate = aggregate
+		self.get_value = get_value if callable(get_value) else lambda _: get_value
+		self.get_text = get_text if callable(get_text) else lambda _: str(get_text)
+
+		# if no 'get_text' provided use 'default_text' if available, otherwise str()
+		if get_text is None:
+			self.get_text = str
+
+
+class Battery(object):
+
+	""" Data record to hold hardware and firmware specs of the battery """
+
+	def __init__(self, slave_address, hardware_version, firmware_version, bms_version, ampere_hours):
+		# type: (int, str, str, str, int) -> None
+		self.slave_address = slave_address
+		self.hardware_version = hardware_version
+		self.firmware_version = firmware_version
+		self.bms_version = bms_version
+		self.ampere_hours = ampere_hours
+
+
+	def __str__(self):
+		return 'slave address = {0}\nhardware version = {1}\nfirmware version = {2}\nbms version = {3}\nampere hours = {4}'.format(
+			self.slave_address, self.hardware_version, self.firmware_version, self.bms_version, str(self.ampere_hours))
+
+
+class BatteryStatus(object):
+	"""
+	record holding the current status of a battery
+	"""
+	def __init__(self, battery, modbus_data):
+		# type: (Battery, list[int]) -> None
+
+		self.battery = battery
+		self.modbus_data = modbus_data

NodeRed/dbus-fzsonick-48tl/dbus-fzsonick-48tl.py

@@ -0,0 +1,980 @@
+#!/usr/bin/python3 -u
+# coding=utf-8
+
+import re
+import sys
+import logging
+from gi.repository import GLib
+
+import config as cfg
+import convert as c
+
+from pymodbus.register_read_message import ReadInputRegistersResponse
+from pymodbus.client.sync import ModbusSerialClient as Modbus
+from pymodbus.other_message import ReportSlaveIdRequest
+from pymodbus.exceptions import ModbusException
+from pymodbus.pdu import ExceptionResponse
+
+from dbus.mainloop.glib import DBusGMainLoop
+from data import BatteryStatus, Signal, Battery, LedColor, CsvSignal, LedState
+
+from collections import Iterable
+from os import path
+
+app_dir = path.dirname(path.realpath(__file__))
+sys.path.insert(1, path.join(app_dir, 'ext', 'velib_python'))
+
+from vedbus import VeDbusService as DBus
+
+import time
+import os
+import csv
+
+
+import requests
+import hmac
+import hashlib
+import base64
+from datetime import datetime
+import io
+
+class S3config:
+    def __init__(self):
+        self.bucket = "1-c0436b6a-d276-4cd8-9c44-1eae86cf5d0e"
+        self.region = "sos-ch-dk-2"
+        self.provider = "exo.io"
+        self.key = "EXOcc0e47a4c4d492888ff5a7f2"
+        self.secret = "79QG4unMh7MeVacMnXr5xGxEyAlWZDIdM-dg_nXFFr4"
+        self.content_type = "text/plain; charset=utf-8"
+
+    @property
+    def host(self):
+        return f"{self.bucket}.{self.region}.{self.provider}"
+
+    @property
+    def url(self):
+        return f"https://{self.host}"
+
+    def create_put_request(self, s3_path, data):
+        headers = self._create_request("PUT", s3_path)
+        url = f"{self.url}/{s3_path}"
+        response = requests.put(url, headers=headers, data=data)
+        return response
+
+    def _create_request(self, method, s3_path):
+        date = datetime.utcnow().strftime('%a, %d %b %Y %H:%M:%S GMT')
+        auth = self._create_authorization(method, self.bucket, s3_path, date, self.key, self.secret, self.content_type)
+        headers = {
+            "Host": self.host,
+            "Date": date,
+            "Authorization": auth,
+            "Content-Type": self.content_type
+        }
+        return headers
+
+    @staticmethod
+    def _create_authorization(method, bucket, s3_path, date, s3_key, s3_secret, content_type="", md5_hash=""):
+        payload = f"{method}\n{md5_hash}\n{content_type}\n{date}\n/{bucket.strip('/')}/{s3_path.strip('/')}"
+        signature = base64.b64encode(
+            hmac.new(s3_secret.encode(), payload.encode(), hashlib.sha1).digest()
+        ).decode()
+        return f"AWS {s3_key}:{signature}"
+
+def read_csv_as_string(file_path):
+    """
+    Reads a CSV file from the given path and returns its content as a single string.
+    """
+    try:
+        with open(file_path, 'r', encoding='utf-8') as file:
+            return file.read()
+    except FileNotFoundError:
+        print(f"Error: The file {file_path} does not exist.")
+        return None
+    except IOError as e:
+        print(f"IO error occurred: {str(e)}")
+        return None
+
+CSV_DIR = "/data/csv_files/"
+#CSV_DIR = "csv_files/"
+
+# Define the path to the file containing the installation name
+INSTALLATION_NAME_FILE = '/data/innovenergy/openvpn/installation-name'
+
+
+# trick the pycharm type-checker into thinking Callable is in scope, not used at runtime
+# noinspection PyUnreachableCode
+if False:
+	from typing import Callable
+
+def interpret_limb_bitmap(bitmap_value):
+	# The bit for string 1 also monitors all 5 strings: 0000 0000 means All 5 strings activated. 0000 0001 means string 1 disabled.
+	string1_disabled = int((bitmap_value & 0b00001) != 0)
+	string2_disabled = int((bitmap_value & 0b00010) != 0)
+	string3_disabled = int((bitmap_value & 0b00100) != 0)
+	string4_disabled = int((bitmap_value & 0b01000) != 0)
+	string5_disabled = int((bitmap_value & 0b10000) != 0)
+	n_limb_strings = string1_disabled+string2_disabled+string3_disabled+string4_disabled+string5_disabled
+	return n_limb_strings
+
+def create_csv_signals(firmware_version):
+	def read_power(status):
+		return int(read_current(status) * read_voltage(status))
+
+	read_voltage = c.read_float(register=999,  scale_factor=0.01, offset=0, places=2)
+	read_current = c.read_float(register=1000, scale_factor=0.01, offset=-10000, places=2)
+
+	read_limb_bitmap = c.read_bitmap(1059)
+
+	def string1_disabled(status):
+		bitmap_value = read_limb_bitmap(status)
+		return int((bitmap_value & 0b00001) != 0)
+
+	def string2_disabled(status):
+		bitmap_value = read_limb_bitmap(status)
+		return int((bitmap_value & 0b00010) != 0)
+
+	def string3_disabled(status):
+		bitmap_value = read_limb_bitmap(status)
+		return int((bitmap_value & 0b00100) != 0)
+
+	def string4_disabled(status):
+		bitmap_value = read_limb_bitmap(status)
+		return int((bitmap_value & 0b01000) != 0)
+
+	def string5_disabled(status):
+		bitmap_value = read_limb_bitmap(status)
+		return int((bitmap_value & 0b10000) != 0)
+
+	
+	def limp_strings_value(status):
+		return interpret_limb_bitmap(read_limb_bitmap(status))
+
+	def calc_power_limit_imposed_by_voltage_limit(v, i, v_limit, r_int):
+		# type: (float, float, float, float) -> float
+
+		dv = v_limit - v
+		di = dv / r_int
+		p_limit = v_limit * (i + di)
+
+		return p_limit
+
+	def calc_power_limit_imposed_by_current_limit(v, i, i_limit, r_int):
+		# type: (float, float, float, float) -> float
+
+		di = i_limit - i
+		dv = di * r_int
+		p_limit = i_limit * (v + dv)
+
+		return p_limit
+
+	def calc_max_charge_power(status):
+		# type: (BatteryStatus) -> int
+		n_strings = cfg.NUM_OF_STRING_PER_BATTERY-limp_strings_value(status)
+		i_max = n_strings * cfg.I_MAX_PER_STRING
+		v_max = cfg.V_MAX
+		r_int_min = cfg.R_STRING_MIN / n_strings
+		r_int_max = cfg.R_STRING_MAX / n_strings
+
+		v = read_voltage(status)
+		i = read_current(status)
+
+		p_limits = [
+			calc_power_limit_imposed_by_voltage_limit(v, i, v_max,r_int_min),
+			calc_power_limit_imposed_by_voltage_limit(v, i, v_max, r_int_max),
+			calc_power_limit_imposed_by_current_limit(v, i, i_max, r_int_min),
+			calc_power_limit_imposed_by_current_limit(v, i, i_max, r_int_max),
+		]
+
+		p_limit = min(p_limits)     # p_limit is normally positive here (signed)
+		p_limit = max(p_limit, 0)   # charge power must not become negative
+
+		return int(p_limit)
+	
+	def calc_max_discharge_power(status):
+		n_strings = cfg.NUM_OF_STRING_PER_BATTERY-limp_strings_value(status)
+		max_discharge_current = n_strings*cfg.I_MAX_PER_STRING
+		return int(max_discharge_current*read_voltage(status))
+
+	def return_led_state_blue(status):
+		led_state = c.read_led_state(register=1004, led=LedColor.blue)(status)
+		if led_state == LedState.blinking_fast or led_state == LedState.blinking_slow:
+			return "Blinking"
+		elif led_state == LedState.on:
+			return "On"
+		elif led_state == LedState.off:
+			return "Off"
+
+		return "Unknown"
+
+	def return_led_state_red(status):
+                led_state = c.read_led_state(register=1004, led=LedColor.red)(status)
+                if led_state == LedState.blinking_fast or led_state == LedState.blinking_slow:
+                        return "Blinking"
+                elif led_state == LedState.on:
+                        return "On"
+                elif led_state == LedState.off:
+                        return "Off"
+
+                return "Unknown"
+
+	def return_led_state_green(status):
+                led_state = c.read_led_state(register=1004, led=LedColor.green)(status)
+                if led_state == LedState.blinking_fast or led_state == LedState.blinking_slow:
+                        return "Blinking"
+                elif led_state == LedState.on:
+                        return "On"
+                elif led_state == LedState.off:
+                        return "Off"
+
+                return "Unknown"
+
+	def return_led_state_amber(status):
+                led_state = c.read_led_state(register=1004, led=LedColor.amber)(status)
+                if led_state == LedState.blinking_fast or led_state == LedState.blinking_slow:
+                        return "Blinking"
+                elif led_state == LedState.on:
+                        return "On"
+                elif led_state == LedState.off:
+                        return "Off"
+
+                return "Unknown"
+
+	total_current = c.read_float(register=1062, scale_factor=0.01, offset=-10000, places=1)
+
+	def read_total_current(status):
+		return total_current(status)
+
+	def read_heating_current(status):
+		return total_current(status) - read_current(status)
+
+	def read_heating_power(status):
+		return read_voltage(status) * read_heating_current(status)
+
+	soc_ah = c.read_float(register=1002, scale_factor=0.1, offset=-10000, places=1)
+
+	def read_soc_ah(status):
+		return soc_ah(status)
+
+	def hex_string_to_ascii(hex_string):
+    		# Ensure the hex_string is correctly formatted without spaces
+    		hex_string = hex_string.replace(" ", "")
+    		# Convert every two characters (a byte) in the hex string to ASCII
+    		ascii_string = ''.join([chr(int(hex_string[i:i+2], 16)) for i in range(0, len(hex_string), 2)])
+    		return ascii_string	
+
+	battery_status_reader = c.read_hex_string(1060,2)	
+	
+	def read_eoc_reached(status):
+		battery_status_string = battery_status_reader(status)
+		#if hex_string_to_ascii(battery_status_string) == "EOC_":
+			#return True 
+		#return False
+		return hex_string_to_ascii(battery_status_string) == "EOC_"
+
+	def read_serial_number(status):
+
+		serial_regs = [1055, 1056, 1057, 1058]
+		serial_parts = []
+
+		for reg in serial_regs:
+			# reading each register as a single hex value
+			hex_value_fun = c.read_hex_string(reg, 1)
+			hex_value = hex_value_fun(status)
+
+			# append without spaces and leading zeros stripped if any
+			serial_parts.append(hex_value.replace(' ', ''))
+
+		# concatenate all parts to form the full serial number
+		serial_number = ''.join(serial_parts).rstrip('0')
+
+		return serial_number
+
+	return [
+
+		CsvSignal('/Battery/Devices/FwVersion', firmware_version),
+		CsvSignal('/Battery/Devices/Dc/Power', read_power, 'W'),
+		CsvSignal('/Battery/Devices/Dc/Voltage', read_voltage, 'V'),
+		CsvSignal('/Battery/Devices/Soc', c.read_float(register=1053, scale_factor=0.1,  offset=0, places=1), '%'),
+		CsvSignal('/Battery/Devices/Temperatures/Cells/Average', c.read_float(register=1003, scale_factor=0.1,  offset=-400, places=1), 'C'),
+
+		CsvSignal('/Battery/Devices/Dc/Current', read_current, 'A'),
+		CsvSignal('/Battery/Devices/BusCurrent', read_total_current, 'A'),
+		CsvSignal('/Battery/Devices/CellsCurrent', read_current, 'A'),
+		CsvSignal('/Battery/Devices/HeatingCurrent', read_heating_current, 'A'),
+		CsvSignal('/Battery/Devices/HeatingPower', read_heating_power, 'W'),
+		CsvSignal('/Battery/Devices/SOCAh', read_soc_ah),
+
+		CsvSignal('/Battery/Devices/Leds/Blue',   return_led_state_blue),
+		CsvSignal('/Battery/Devices/Leds/Red',    return_led_state_red),
+		CsvSignal('/Battery/Devices/Leds/Green',  return_led_state_green),
+		CsvSignal('/Battery/Devices/Leds/Amber',  return_led_state_amber),
+
+		CsvSignal('/Battery/Devices/BatteryStrings/String1Active', string1_disabled),
+		CsvSignal('/Battery/Devices/BatteryStrings/String2Active', string2_disabled),
+		CsvSignal('/Battery/Devices/BatteryStrings/String3Active', string3_disabled),
+		CsvSignal('/Battery/Devices/BatteryStrings/String4Active', string4_disabled),
+		CsvSignal('/Battery/Devices/BatteryStrings/String5Active', string5_disabled),
+
+		CsvSignal('/Battery/Devices/IoStatus/ConnectedToDcBus',       c.read_bool(register=1013, bit=0)),
+		CsvSignal('/Battery/Devices/IoStatus/AlarmOutActive',         c.read_bool(register=1013, bit=1)),
+		CsvSignal('/Battery/Devices/IoStatus/InternalFanActive',      c.read_bool(register=1013, bit=2)),
+		CsvSignal('/Battery/Devices/IoStatus/VoltMeasurementAllowed', c.read_bool(register=1013, bit=3)),
+		CsvSignal('/Battery/Devices/IoStatus/AuxRelayBus',            c.read_bool(register=1013, bit=4)),
+		CsvSignal('/Battery/Devices/IoStatus/RemoteStateActive',      c.read_bool(register=1013, bit=5)),
+		CsvSignal('/Battery/Devices/IoStatus/RiscActive',             c.read_bool(register=1013, bit=6)),
+
+
+		CsvSignal('/Battery/Devices/Eoc', read_eoc_reached),
+		CsvSignal('/Battery/Devices/SerialNumber', read_serial_number),
+		CsvSignal('/Battery/Devices/TimeSinceTOC', c.read_float(register=1052)),
+		CsvSignal('/Battery/Devices/MaxChargePower',     calc_max_charge_power),
+		CsvSignal('/Battery/Devices/MaxDischargePower',     calc_max_discharge_power),
+
+		# Warnings
+		CsvSignal('/Battery/Devices/WarningFlags/TaM1',    c.read_bool(register=1005, bit=1)),
+		CsvSignal('/Battery/Devices/WarningFlags/TbM1',    c.read_bool(register=1005, bit=4)),
+		CsvSignal('/Battery/Devices/WarningFlags/VBm1',    c.read_bool(register=1005, bit=6)),
+		CsvSignal('/Battery/Devices/WarningFlags/VBM1',    c.read_bool(register=1005, bit=8)),
+		CsvSignal('/Battery/Devices/WarningFlags/IDM1',    c.read_bool(register=1005, bit=10)),
+		CsvSignal('/Battery/Devices/WarningFlags/vsm1',    c.read_bool(register=1005, bit=22)),
+		CsvSignal('/Battery/Devices/WarningFlags/vsM1',    c.read_bool(register=1005, bit=24)),
+		CsvSignal('/Battery/Devices/WarningFlags/iCM1',    c.read_bool(register=1005, bit=26)),
+		CsvSignal('/Battery/Devices/WarningFlags/iDM1',    c.read_bool(register=1005, bit=28)),
+		CsvSignal('/Battery/Devices/WarningFlags/MID1',    c.read_bool(register=1005, bit=30)),
+		CsvSignal('/Battery/Devices/WarningFlags/BLPW',    c.read_bool(register=1005, bit=32)),
+		CsvSignal('/Battery/Devices/WarningFlags/CCBF',    c.read_bool(register=1005, bit=33)),
+		CsvSignal('/Battery/Devices/WarningFlags/Ah_W',    c.read_bool(register=1005, bit=35)),
+		CsvSignal('/Battery/Devices/WarningFlags/MPMM',    c.read_bool(register=1005, bit=38)),
+		CsvSignal('/Battery/Devices/WarningFlags/TCdi',    c.read_bool(register=1005, bit=40)),
+		CsvSignal('/Battery/Devices/WarningFlags/LMPW',    c.read_bool(register=1005, bit=44)),
+		CsvSignal('/Battery/Devices/WarningFlags/TOCW',    c.read_bool(register=1005, bit=47)),
+		CsvSignal('/Battery/Devices/WarningFlags/BUSL',    c.read_bool(register=1005, bit=49)),
+
+		# Alarms
+		CsvSignal('/Battery/Devices/AlarmFlags/Tam',     c.read_bool(register=1005, bit=0)),
+		CsvSignal('/Battery/Devices/AlarmFlags/TaM2',    c.read_bool(register=1005, bit=2)),
+		CsvSignal('/Battery/Devices/AlarmFlags/Tbm',     c.read_bool(register=1005, bit=3)),
+		CsvSignal('/Battery/Devices/AlarmFlags/TbM2',    c.read_bool(register=1005, bit=5)),
+		CsvSignal('/Battery/Devices/AlarmFlags/VBm2',    c.read_bool(register=1005, bit=7)),
+		CsvSignal('/Battery/Devices/AlarmFlags/VBM2',    c.read_bool(register=1005, bit=9)),
+		CsvSignal('/Battery/Devices/AlarmFlags/IDM2',    c.read_bool(register=1005, bit=11)),
+		CsvSignal('/Battery/Devices/AlarmFlags/ISOB',    c.read_bool(register=1005, bit=12)),
+		CsvSignal('/Battery/Devices/AlarmFlags/MSWE',    c.read_bool(register=1005, bit=13)),
+		CsvSignal('/Battery/Devices/AlarmFlags/FUSE',    c.read_bool(register=1005, bit=14)),
+		CsvSignal('/Battery/Devices/AlarmFlags/HTRE',    c.read_bool(register=1005, bit=15)),
+		CsvSignal('/Battery/Devices/AlarmFlags/TCPE',    c.read_bool(register=1005, bit=16)),
+		CsvSignal('/Battery/Devices/AlarmFlags/STRE',    c.read_bool(register=1005, bit=17)),
+		CsvSignal('/Battery/Devices/AlarmFlags/CME',     c.read_bool(register=1005, bit=18)),
+		CsvSignal('/Battery/Devices/AlarmFlags/HWFL',    c.read_bool(register=1005, bit=19)),
+		CsvSignal('/Battery/Devices/AlarmFlags/HWEM',    c.read_bool(register=1005, bit=20)),
+		CsvSignal('/Battery/Devices/AlarmFlags/ThM',     c.read_bool(register=1005, bit=21)),
+		CsvSignal('/Battery/Devices/AlarmFlags/vsm2',    c.read_bool(register=1005, bit=23)),
+		CsvSignal('/Battery/Devices/AlarmFlags/vsM2',    c.read_bool(register=1005, bit=25)),
+		CsvSignal('/Battery/Devices/AlarmFlags/iCM2',    c.read_bool(register=1005, bit=27)),
+		CsvSignal('/Battery/Devices/AlarmFlags/iDM2',    c.read_bool(register=1005, bit=29)),
+		CsvSignal('/Battery/Devices/AlarmFlags/MID2',    c.read_bool(register=1005, bit=31)),
+		CsvSignal('/Battery/Devices/AlarmFlags/HTFS',    c.read_bool(register=1005, bit=42)),
+		CsvSignal('/Battery/Devices/AlarmFlags/DATA',    c.read_bool(register=1005, bit=43)),
+		CsvSignal('/Battery/Devices/AlarmFlags/LMPA',    c.read_bool(register=1005, bit=45)),
+		CsvSignal('/Battery/Devices/AlarmFlags/HEBT',    c.read_bool(register=1005, bit=46)),
+		CsvSignal('/Battery/Devices/AlarmFlags/CURM',    c.read_bool(register=1005, bit=48)),
+
+		]
+
+
+def init_signals(hardware_version, firmware_version, n_batteries):
+	# type: (str,str,int) -> Iterable[Signal]
+	"""
+	A Signal holds all information necessary for the handling of a
+	certain datum (e.g. voltage) published by the battery.
+
+	Signal(dbus_path, aggregate, get_value, get_text = str)
+
+	dbus_path: str
+		object_path on DBus where the datum needs to be published
+
+	aggregate: Iterable[object] -> object
+		function that combines the values of multiple batteries into one.
+		e.g. sum for currents, or mean for voltages
+
+	get_value: (BatteryStatus) -> object [optional]
+		function to extract the datum from the modbus record,
+		alternatively: a constant
+
+	get_text: (object) -> unicode [optional]
+		function to render datum to text, needed by DBus
+		alternatively: a constant
+
+
+	The conversion functions use the same parameters (e.g scale_factor, offset)
+	as described in the document 'T48TLxxx ModBus Protocol Rev.7.1' which can
+	be found in the /doc folder
+	"""
+
+	product_id_hex = '0x{0:04x}'.format(cfg.PRODUCT_ID)
+
+	read_voltage = c.read_float(register=999,  scale_factor=0.01, offset=0, places=2)
+	read_current = c.read_float(register=1000, scale_factor=0.01, offset=-10000, places=2)
+
+	def read_power(status):
+		return int(read_current(status) * read_voltage(status))
+	
+	read_limb_bitmap = c.read_bitmap(1059)
+	def limp_strings_value(status):
+		return interpret_limb_bitmap(read_limb_bitmap(status))
+	
+	def max_discharge_current(status):
+		return (cfg.NUM_OF_STRING_PER_BATTERY-limp_strings_value(status))*cfg.I_MAX_PER_STRING
+	
+	def max_charge_current(status):
+		return status.battery.ampere_hours/2
+	
+	def calc_power_limit_imposed_by_voltage_limit(v, i, v_limit, r_int):
+		# type: (float, float, float, float) -> float
+
+		dv = v_limit - v
+		di = dv / r_int
+		p_limit = v_limit * (i + di)
+
+		return p_limit
+
+	def calc_power_limit_imposed_by_current_limit(v, i, i_limit, r_int):
+		# type: (float, float, float, float) -> float
+
+		di = i_limit - i
+		dv = di * r_int
+		p_limit = i_limit * (v + dv)
+
+		return p_limit
+
+	def calc_max_charge_power(status):
+		# type: (BatteryStatus) -> int
+		n_strings = cfg.NUM_OF_STRING_PER_BATTERY-limp_strings_value(status)
+		i_max = n_strings * cfg.I_MAX_PER_STRING
+		v_max = cfg.V_MAX
+		r_int_min = cfg.R_STRING_MIN / n_strings
+		r_int_max = cfg.R_STRING_MAX / n_strings
+
+		v = read_voltage(status)
+		i = read_current(status)
+
+		p_limits = [
+			calc_power_limit_imposed_by_voltage_limit(v, i, v_max,r_int_min),
+			calc_power_limit_imposed_by_voltage_limit(v, i, v_max, r_int_max),
+			calc_power_limit_imposed_by_current_limit(v, i, i_max, r_int_min),
+			calc_power_limit_imposed_by_current_limit(v, i, i_max, r_int_max),
+		]
+
+		p_limit = min(p_limits)     # p_limit is normally positive here (signed)
+		p_limit = max(p_limit, 0)   # charge power must not become negative
+
+		return int(p_limit)
+
+	product_name = cfg.PRODUCT_NAME
+	if n_batteries > 1:
+		product_name = cfg.PRODUCT_NAME + ' x' + str(n_batteries)
+
+	return [
+		# Node Red related dbus paths
+		Signal('/TimeToTOCRequest', min, c.read_float(register=1052)),
+		Signal('/NumOfLimbStrings', c.return_in_list, get_value=limp_strings_value),
+		Signal('/NumOfBatteries', max, get_value=n_batteries),
+		Signal('/Dc/0/Voltage', c.mean, get_value=read_voltage, get_text=c.append_unit('V')),
+		Signal('/Dc/0/Current', c.ssum,    get_value=read_current, get_text=c.append_unit('A')),
+		Signal('/Dc/0/Power',   c.ssum,    get_value=read_power,   get_text=c.append_unit('W')),
+
+		Signal('/BussVoltage',      c.mean, c.read_float(register=1001, scale_factor=0.01, offset=0, places=2),    c.append_unit('V')),
+		Signal('/Soc',              c.mean, c.read_float(register=1053, scale_factor=0.1,  offset=0, places=1),    c.append_unit('%')),
+		Signal('/LowestSoc',              min, c.read_float(register=1053, scale_factor=0.1,  offset=0, places=1),    c.append_unit('%')),
+		Signal('/Dc/0/Temperature', c.mean, c.read_float(register=1003, scale_factor=0.1,  offset=-400, places=1), c.append_unit(u'°C')),
+		Signal('/Dc/0/LowestTemperature', min, c.read_float(register=1003, scale_factor=0.1,  offset=-400, places=1), c.append_unit(u'°C')),
+
+		# Charge/Discharge current, voltage and power
+		Signal('/Info/MaxDischargeCurrent', c.ssum, max_discharge_current,c.append_unit('A')),
+		Signal('/Info/MaxChargeCurrent',    c.ssum, max_charge_current, c.append_unit('A')),
+		Signal('/Info/MaxChargeVoltage',    min, cfg.MAX_CHARGE_VOLTAGE, c.append_unit('V')),
+		Signal('/Info/MaxChargePower',      c.ssum, calc_max_charge_power),
+
+		# Victron mandatory dbus paths
+		Signal('/Mgmt/ProcessName',    c.first, __file__),
+		Signal('/Mgmt/ProcessVersion', c.first, cfg.SOFTWARE_VERSION),
+		Signal('/Mgmt/Connection',     c.first, cfg.CONNECTION),
+		Signal('/DeviceInstance',      c.first, cfg.DEVICE_INSTANCE),
+		Signal('/ProductName',         c.first, product_name),
+		Signal('/ProductId',           c.first, cfg.PRODUCT_ID, product_id_hex),
+		Signal('/Connected', c.first, 1),
+		#Signal('/FirmwareVersion', c.first, cfg.FIRMWARE_VERSION, firmware_version),
+		Signal('/FirmwareVersion', c.return_in_list, firmware_version),
+		Signal('/HardwareVersion', c.first, cfg.HARDWARE_VERSION, hardware_version),
+
+		## Diagnostics
+		Signal('/Diagnostics/BmsVersion',   c.first, lambda s: s.battery.bms_version),
+
+		# Warnings
+  		#Signal('/Diagnostics/WarningFlags', c.first, c.read_hex_string(register=1005, count=4)),
+		Signal('/WarningFlags/TaM1',    c.return_in_list, c.read_bool(register=1005, bit=1)),
+		Signal('/WarningFlags/TbM1',    c.return_in_list, c.read_bool(register=1005, bit=4)),
+		Signal('/WarningFlags/VBm1',    c.return_in_list, c.read_bool(register=1005, bit=6)),
+		Signal('/WarningFlags/VBM1',    c.return_in_list, c.read_bool(register=1005, bit=8)),
+		Signal('/WarningFlags/IDM1',    c.return_in_list, c.read_bool(register=1005, bit=10)),
+		Signal('/WarningFlags/vsm1',    c.return_in_list, c.read_bool(register=1005, bit=22)),
+		Signal('/WarningFlags/vsM1',    c.return_in_list, c.read_bool(register=1005, bit=24)),
+		Signal('/WarningFlags/iCM1',    c.return_in_list, c.read_bool(register=1005, bit=26)),
+		Signal('/WarningFlags/iDM1',    c.return_in_list, c.read_bool(register=1005, bit=28)),
+		Signal('/WarningFlags/MID1',    c.return_in_list, c.read_bool(register=1005, bit=30)),
+		Signal('/WarningFlags/BLPW',    c.return_in_list, c.read_bool(register=1005, bit=32)),
+		Signal('/WarningFlags/CCBF',    c.return_in_list, c.read_bool(register=1005, bit=33)),
+		Signal('/WarningFlags/Ah_W',    c.return_in_list, c.read_bool(register=1005, bit=35)),
+		Signal('/WarningFlags/MPMM',    c.return_in_list, c.read_bool(register=1005, bit=38)),
+		#Signal('/WarningFlags/TCMM',    c.return_in_list, c.read_bool(register=1005, bit=39)),
+		Signal('/WarningFlags/TCdi',    c.return_in_list, c.read_bool(register=1005, bit=40)),
+		Signal('/WarningFlags/LMPW',    c.return_in_list, c.read_bool(register=1005, bit=44)),
+		Signal('/WarningFlags/TOCW',    c.return_in_list, c.read_bool(register=1005, bit=47)),
+		Signal('/WarningFlags/BUSL',    c.return_in_list, c.read_bool(register=1005, bit=49)),
+
+		# Alarms
+  		#Signal('/Diagnostics/AlarmFlags',   c.first, c.read_hex_string(register=1009, count=4)),
+		Signal('/AlarmFlags/Tam',     c.return_in_list, c.read_bool(register=1005, bit=0)),
+		Signal('/AlarmFlags/TaM2',    c.return_in_list, c.read_bool(register=1005, bit=2)),
+		Signal('/AlarmFlags/Tbm',     c.return_in_list, c.read_bool(register=1005, bit=3)),
+		Signal('/AlarmFlags/TbM2',    c.return_in_list, c.read_bool(register=1005, bit=5)),
+		Signal('/AlarmFlags/VBm2',    c.return_in_list, c.read_bool(register=1005, bit=7)),
+		Signal('/AlarmFlags/VBM2',    c.return_in_list, c.read_bool(register=1005, bit=9)),
+		Signal('/AlarmFlags/IDM2',    c.return_in_list, c.read_bool(register=1005, bit=11)),
+		Signal('/AlarmFlags/ISOB',    c.return_in_list, c.read_bool(register=1005, bit=12)),
+		Signal('/AlarmFlags/MSWE',    c.return_in_list, c.read_bool(register=1005, bit=13)),
+		Signal('/AlarmFlags/FUSE',    c.return_in_list, c.read_bool(register=1005, bit=14)),
+		Signal('/AlarmFlags/HTRE',    c.return_in_list, c.read_bool(register=1005, bit=15)),
+		Signal('/AlarmFlags/TCPE',    c.return_in_list, c.read_bool(register=1005, bit=16)),
+		Signal('/AlarmFlags/STRE',    c.return_in_list, c.read_bool(register=1005, bit=17)),
+		Signal('/AlarmFlags/CME',     c.return_in_list, c.read_bool(register=1005, bit=18)),
+		Signal('/AlarmFlags/HWFL',    c.return_in_list, c.read_bool(register=1005, bit=19)),
+		Signal('/AlarmFlags/HWEM',    c.return_in_list, c.read_bool(register=1005, bit=20)),
+		Signal('/AlarmFlags/ThM',     c.return_in_list, c.read_bool(register=1005, bit=21)),
+		Signal('/AlarmFlags/vsm2',    c.return_in_list, c.read_bool(register=1005, bit=23)),
+		Signal('/AlarmFlags/vsM2',    c.return_in_list, c.read_bool(register=1005, bit=25)),
+		Signal('/AlarmFlags/iCM2',    c.return_in_list, c.read_bool(register=1005, bit=27)),
+		Signal('/AlarmFlags/iDM2',    c.return_in_list, c.read_bool(register=1005, bit=29)),
+		Signal('/AlarmFlags/MID2',    c.return_in_list, c.read_bool(register=1005, bit=31)),
+		#Signal('/AlarmFlags/TcBM',    c.return_in_list, c.read_bool(register=1005, bit=36)),
+		#Signal('/AlarmFlags/BRNF',    c.return_in_list, c.read_bool(register=1005, bit=37)),
+		Signal('/AlarmFlags/HTFS',    c.return_in_list, c.read_bool(register=1005, bit=42)),
+		Signal('/AlarmFlags/DATA',    c.return_in_list, c.read_bool(register=1005, bit=43)),
+		Signal('/AlarmFlags/LMPA',   c.return_in_list, c.read_bool(register=1005, bit=45)),
+		Signal('/AlarmFlags/HEBT',   c.return_in_list, c.read_bool(register=1005, bit=46)),
+		Signal('/AlarmFlags/CURM',   c.return_in_list, c.read_bool(register=1005, bit=48)),
+
+		# LedStatus
+		Signal('/Diagnostics/LedStatus/Red',   c.first, c.read_led_state(register=1004, led=LedColor.red)),
+		Signal('/Diagnostics/LedStatus/Blue',  c.first, c.read_led_state(register=1004, led=LedColor.blue)),
+		Signal('/Diagnostics/LedStatus/Green', c.first, c.read_led_state(register=1004, led=LedColor.green)),
+		Signal('/Diagnostics/LedStatus/Amber', c.first, c.read_led_state(register=1004, led=LedColor.amber)),
+
+		# IO Status
+		Signal('/Diagnostics/IoStatus/MainSwitchClosed',       c.return_in_list, c.read_bool(register=1013, bit=0)),
+		Signal('/Diagnostics/IoStatus/AlarmOutActive',         c.return_in_list, c.read_bool(register=1013, bit=1)),
+		Signal('/Diagnostics/IoStatus/InternalFanActive',      c.return_in_list, c.read_bool(register=1013, bit=2)),
+		Signal('/Diagnostics/IoStatus/VoltMeasurementAllowed', c.return_in_list, c.read_bool(register=1013, bit=3)),
+		Signal('/Diagnostics/IoStatus/AuxRelay',               c.return_in_list, c.read_bool(register=1013, bit=4)),
+		Signal('/Diagnostics/IoStatus/RemoteState',            c.return_in_list, c.read_bool(register=1013, bit=5)),
+		Signal('/Diagnostics/IoStatus/RiscOn',               c.return_in_list, c.read_bool(register=1013, bit=6)),
+		]
+
+
+def init_modbus(tty):
+	# type: (str) -> Modbus
+
+	logging.debug('initializing Modbus')
+
+	return Modbus(
+		port='/dev/' + tty,
+		method=cfg.MODE,
+		baudrate=cfg.BAUD_RATE,
+		stopbits=cfg.STOP_BITS,
+		bytesize=cfg.BYTE_SIZE,
+		timeout=cfg.TIMEOUT,
+		parity=cfg.PARITY)
+
+
+def init_dbus(tty, signals):
+	# type: (str, Iterable[Signal]) -> DBus
+
+	logging.debug('initializing DBus service')
+	dbus = DBus(servicename=cfg.SERVICE_NAME_PREFIX + tty)
+
+	logging.debug('initializing DBus paths')
+	for signal in signals:
+		init_dbus_path(dbus, signal)
+
+	return dbus
+
+
+# noinspection PyBroadException
+def try_get_value(sig):
+	# type: (Signal) -> object
+	try:
+		return sig.get_value(None)
+	except:
+		return None
+
+
+def init_dbus_path(dbus, sig):
+	# type: (DBus, Signal) -> ()
+
+	dbus.add_path(
+		sig.dbus_path,
+		try_get_value(sig),
+		gettextcallback=lambda _, v: sig.get_text(v))
+
+
+def init_main_loop():
+	# type: () -> DBusGMainLoop
+	logging.debug('initializing DBusGMainLoop Loop')
+	DBusGMainLoop(set_as_default=True)
+	return GLib.MainLoop()
+
+
+def report_slave_id(modbus, slave_address):
+	# type: (Modbus, int) -> str
+
+	slave = str(slave_address)
+
+	logging.debug('requesting slave id from node ' + slave)
+
+	try:
+
+		modbus.connect()
+
+		request = ReportSlaveIdRequest(unit=slave_address)
+		response = modbus.execute(request)
+
+		if response is ExceptionResponse or issubclass(type(response), ModbusException):
+			raise Exception('failed to get slave id from ' + slave + ' : ' + str(response))
+
+		return response.identifier
+
+	finally:
+		modbus.close()
+
+
+def identify_battery(modbus, slave_address):
+	# type: (Modbus, int) -> Battery
+
+	logging.info('identifying battery...')
+
+	hardware_version, bms_version, ampere_hours = parse_slave_id(modbus, slave_address)
+	firmware_version = read_firmware_version(modbus, slave_address)
+
+	specs = Battery(
+		slave_address=slave_address,
+		hardware_version=hardware_version,
+		firmware_version=firmware_version,
+		bms_version=bms_version,
+		ampere_hours=ampere_hours)
+
+	logging.info('battery identified:\n{0}'.format(str(specs)))
+
+	return specs
+
+
+def identify_batteries(modbus):
+	# type: (Modbus) -> list[Battery]
+
+	def _identify_batteries():
+		address_range = range(1, cfg.MAX_SLAVE_ADDRESS + 1)
+
+		for slave_address in address_range:
+			try:
+				yield identify_battery(modbus, slave_address)
+			except Exception as e:
+				logging.info('failed to identify battery at {0} : {1}'.format(str(slave_address), str(e)))
+
+	return list(_identify_batteries())  # force that lazy iterable!
+
+
+def parse_slave_id(modbus, slave_address):
+	# type: (Modbus, int) -> (str, str, int)
+
+	slave_id = report_slave_id(modbus, slave_address)
+
+	sid = re.sub(b'[^\x20-\x7E]', b'', slave_id)  # remove weird special chars
+
+	match = re.match('(?P<hw>48TL(?P<ah>\d+)) *(?P<bms>.*)', sid.decode('ascii'))
+
+	if match is None:
+		raise Exception('no known battery found')
+
+	return match.group('hw'), match.group('bms'), int(match.group('ah'))
+
+
+def read_firmware_version(modbus, slave_address):
+	# type: (Modbus, int) -> str
+
+	logging.debug('reading firmware version')
+
+	try:
+		modbus.connect()
+
+		response = read_modbus_registers(modbus, slave_address, base_address=1054, count=1)
+		register = response.registers[0]
+
+		return '{0:0>4X}'.format(register)
+
+	finally:
+		modbus.close()  # close in any case
+
+
+def read_modbus_registers(modbus, slave_address, base_address=cfg.BASE_ADDRESS, count=cfg.NO_OF_REGISTERS):
+	# type: (Modbus, int) -> ReadInputRegistersResponse
+
+	logging.debug('requesting modbus registers {0}-{1}'.format(base_address, base_address + count))
+
+	return modbus.read_input_registers(
+		address=base_address,
+		count=count,
+		unit=slave_address)
+
+
+def read_battery_status(modbus, battery):
+	# type: (Modbus, Battery) -> BatteryStatus
+	"""
+	Read the modbus registers containing the battery's status info.
+	"""
+
+	logging.debug('reading battery status')
+
+	try:
+		modbus.connect()
+		data = read_modbus_registers(modbus, battery.slave_address)
+		return BatteryStatus(battery, data.registers)
+
+	finally:
+		modbus.close()  # close in any case
+
+
+def publish_values(dbus, signals, statuses):
+	# type: (DBus, Iterable[Signal], Iterable[BatteryStatus]) -> ()
+
+	for s in signals:
+		values = [s.get_value(status) for status in statuses]
+		with dbus as srv:
+			srv[s.dbus_path] = s.aggregate(values)
+
+
+def update(modbus, batteries, dbus, signals, csv_signals):
+	# type: (Modbus, Iterable[Battery], DBus, Iterable[Signal]) -> bool
+
+	"""
+	Main update function
+
+	1. requests status record each battery via modbus,
+	2. parses the data using Signal.get_value
+	3. aggregates the data from all batteries into one datum using Signal.aggregate
+	4. publishes the data on the dbus
+	"""
+
+	logging.debug('starting update cycle')
+
+	statuses = [read_battery_status(modbus, battery) for battery in batteries]
+	node_numbers = [battery.slave_address for battery in batteries]
+
+	publish_values(dbus, signals, statuses)
+	create_csv_files(csv_signals, statuses, node_numbers)
+
+	logging.debug('finished update cycle\n')
+	return True
+
+
+def print_usage():
+	print ('Usage:   ' + __file__ + ' <serial device>')
+	print ('Example: ' + __file__ + ' ttyUSB0')
+
+
+def parse_cmdline_args(argv):
+	# type: (list[str]) -> str
+
+	if len(argv) == 0:
+		logging.info('missing command line argument for tty device')
+		print_usage()
+		sys.exit(1)
+
+	return argv[0]
+
+
+alive = True   # global alive flag, watchdog_task clears it, update_task sets it
+
+
+def create_update_task(modbus, dbus, batteries, signals, csv_signals, main_loop):
+	# type: (Modbus, DBus, Iterable[Battery], Iterable[Signal], DBusGMainLoop) -> Callable[[],bool]
+	"""
+	Creates an update task which runs the main update function
+	and resets the alive flag
+	"""
+
+	def update_task():
+		# type: () -> bool
+
+		global alive
+
+		alive = update(modbus, batteries, dbus, signals, csv_signals)
+
+		if not alive:
+			logging.info('update_task: quitting main loop because of error')
+			main_loop.quit()
+
+		return alive
+
+	return update_task
+
+
+def create_watchdog_task(main_loop):
+	# type: (DBusGMainLoop) -> Callable[[],bool]
+	"""
+	Creates a Watchdog task that monitors the alive flag.
+	The watchdog kills the main loop if the alive flag is not periodically reset by the update task.
+	Who watches the watchdog?
+	"""
+	def watchdog_task():
+		# type: () -> bool
+
+		global alive
+
+		if alive:
+			logging.debug('watchdog_task: update_task is alive')
+			alive = False
+			return True
+		else:
+			logging.info('watchdog_task: killing main loop because update_task is no longer alive')
+			main_loop.quit()
+			return False
+
+	return watchdog_task
+
+
+def get_installation_name(file_path):
+	with open(file_path, 'r') as file:
+		return file.read().strip()
+
+def manage_csv_files(directory_path, max_files=20):
+    csv_files = [f for f in os.listdir(directory_path)]
+    csv_files.sort(key=lambda x: os.path.getctime(os.path.join(directory_path, x)))
+
+    # Remove oldest files if exceeds maximum
+    while len(csv_files) > max_files:
+        file_to_delete = os.path.join(directory_path, csv_files.pop(0))
+        os.remove(file_to_delete)
+
+def serialize_for_csv(value):
+	if isinstance(value, (dict, list, tuple)):
+		return json.dumps(value, ensure_ascii=False)
+	return str(value)
+
+def insert_id(path, id_number):
+	parts = path.split("/")
+
+	insert_position = parts.index("Devices") + 1
+
+	parts.insert(insert_position, str(id_number))
+
+	return "/".join(parts)
+
+def create_csv_files(signals, statuses, node_numbers):
+	timestamp = int(time.time())
+	if timestamp % 2 != 0:
+		timestamp -= 1
+	# Create CSV directory if it doesn't exist
+	if not os.path.exists(CSV_DIR):
+		os.makedirs(CSV_DIR)
+
+	#installation_name = get_installation_name(INSTALLATION_NAME_FILE)
+	csv_filename = f"{timestamp}.csv"
+	csv_path = os.path.join(CSV_DIR, csv_filename)
+
+	# Append values to the CSV file
+	with open(csv_path, 'a', newline='') as csvfile:
+		csv_writer = csv.writer(csvfile, delimiter=';')
+
+		# Add a special row for the nodes configuration
+		nodes_config_path = "/Config/Devices/BatteryNodes"
+		nodes_list = ",".join(str(node) for node in node_numbers)
+		config_row = [nodes_config_path, nodes_list, ""]
+		csv_writer.writerow(config_row)
+
+		# Iterate over each node and signal to create rows in the new format
+		for i, node in enumerate(node_numbers):
+			for s in signals:
+				signal_name = insert_id(s.name, i+1)
+				#value = serialize_for_csv(s.get_value(statuses[i]))
+				value = s.get_value(statuses[i])
+				row_values = [signal_name, value, s.get_text]
+				csv_writer.writerow(row_values)
+
+	# Manage CSV files, keep a limited number of files
+
+
+
+	# Create the CSV as a string
+	csv_data = read_csv_as_string(csv_path)
+	
+
+	# Create an S3config instance
+	s3_config = S3config()
+	response = s3_config.create_put_request(csv_filename, csv_data)
+
+	if response.status_code == 200:
+		os.remove(csv_path)
+		print("Success")
+	else:
+		failed_dir = os.path.join(CSV_DIR, "failed")
+		if not os.path.exists(failed_dir):
+			os.makedirs(failed_dir)
+		failed_path = os.path.join(failed_dir, csv_filename)
+		os.rename(csv_path, failed_path)
+		print("Uploading failed")
+		manage_csv_files(failed_dir, 10)
+
+
+	manage_csv_files(CSV_DIR)
+
+
+def main(argv):
+	# type: (list[str]) -> ()
+
+	logging.basicConfig(level=cfg.LOG_LEVEL)
+	logging.info('starting ' + __file__)
+
+	tty = parse_cmdline_args(argv)
+	modbus = init_modbus(tty)
+
+	batteries = identify_batteries(modbus)
+
+	n = len(batteries)
+
+	logging.info('found ' + str(n) + (' battery' if n == 1 else ' batteries'))
+
+	if n <= 0:
+		sys.exit(2)
+
+	bat = c.first(batteries)  # report hw and fw version of first battery found
+
+	signals = init_signals(bat.hardware_version, bat.firmware_version, n)
+	csv_signals = create_csv_signals(bat.firmware_version)
+
+	main_loop = init_main_loop()      # must run before init_dbus because gobject does some global magic
+	dbus = init_dbus(tty, signals)
+
+	update_task = create_update_task(modbus, dbus, batteries, signals, csv_signals, main_loop)
+	watchdog_task = create_watchdog_task(main_loop)
+
+	GLib.timeout_add(cfg.UPDATE_INTERVAL * 2, watchdog_task)  # add watchdog first
+	GLib.timeout_add(cfg.UPDATE_INTERVAL, update_task)        # call update once every update_interval
+
+	logging.info('starting GLib.MainLoop')
+	main_loop.run()
+	logging.info('GLib.MainLoop was shut down')
+
+	sys.exit(0xFF)  # reaches this only on error
+
+
+if __name__ == "__main__":
+	main(sys.argv[1:])

NodeRed/dbus-fzsonick-48tl/ext/velib_python/ve_utils.py

@@ -0,0 +1,276 @@
+#!/usr/bin/env python3
+# -*- coding: utf-8 -*-
+import sys
+from traceback import print_exc
+from os import _exit as os_exit
+from os import statvfs
+from subprocess import check_output, CalledProcessError
+import logging
+import dbus
+logger = logging.getLogger(__name__)
+
+VEDBUS_INVALID = dbus.Array([], signature=dbus.Signature('i'), variant_level=1)
+
+class NoVrmPortalIdError(Exception):
+	pass
+
+# Use this function to make sure the code quits on an unexpected exception. Make sure to use it
+# when using GLib.idle_add and also GLib.timeout_add.
+# Without this, the code will just keep running, since GLib does not stop the mainloop on an
+# exception.
+# Example: GLib.idle_add(exit_on_error, myfunc, arg1, arg2)
+def exit_on_error(func, *args, **kwargs):
+	try:
+		return func(*args, **kwargs)
+	except:
+		try:
+			print ('exit_on_error: there was an exception. Printing stacktrace will be tried and then exit')
+			print_exc()
+		except:
+			pass
+
+		# sys.exit() is not used, since that throws an exception, which does not lead to a program
+		# halt when used in a dbus callback, see connection.py in the Python/Dbus libraries, line 230.
+		os_exit(1)
+
+
+__vrm_portal_id = None
+def get_vrm_portal_id():
+	# The original definition of the VRM Portal ID is that it is the mac
+	# address of the onboard- ethernet port (eth0), stripped from its colons
+	# (:) and lower case. This may however differ between platforms. On Venus
+	# the task is therefore deferred to /sbin/get-unique-id so that a
+	# platform specific method can be easily defined.
+	#
+	# If /sbin/get-unique-id does not exist, then use the ethernet address
+	# of eth0. This also handles the case where velib_python is used as a
+	# package install on a Raspberry Pi.
+	#
+	# On a Linux host where the network interface may not be eth0, you can set
+	# the VRM_IFACE environment variable to the correct name.
+
+	global __vrm_portal_id
+
+	if __vrm_portal_id:
+		return __vrm_portal_id
+
+	portal_id = None
+
+	# First try the method that works if we don't have a data partition. This
+	# will fail when the current user is not root.
+	try:
+		portal_id = check_output("/sbin/get-unique-id").decode("utf-8", "ignore").strip()
+		if not portal_id:
+			raise NoVrmPortalIdError("get-unique-id returned blank")
+		__vrm_portal_id = portal_id
+		return portal_id
+	except CalledProcessError:
+		# get-unique-id returned non-zero
+		raise NoVrmPortalIdError("get-unique-id returned non-zero")
+	except OSError:
+		# File doesn't exist, use fallback
+		pass
+
+	# Fall back to getting our id using a syscall. Assume we are on linux.
+	# Allow the user to override what interface is used using an environment
+	# variable.
+	import fcntl, socket, struct, os
+
+	iface = os.environ.get('VRM_IFACE', 'eth0').encode('ascii')
+	s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
+	try:
+		info = fcntl.ioctl(s.fileno(), 0x8927,  struct.pack('256s', iface[:15]))
+	except IOError:
+		raise NoVrmPortalIdError("ioctl failed for eth0")
+
+	__vrm_portal_id = info[18:24].hex()
+	return __vrm_portal_id
+
+
+# See VE.Can registers - public.docx for definition of this conversion
+def convert_vreg_version_to_readable(version):
+	def str_to_arr(x, length):
+		a = []
+		for i in range(0, len(x), length):
+			a.append(x[i:i+length])
+		return a
+
+	x = "%x" % version
+	x = x.upper()
+
+	if len(x) == 5 or len(x) == 3 or len(x) == 1:
+		x = '0' + x
+
+	a = str_to_arr(x, 2);
+
+	# remove the first 00 if there are three bytes and it is 00
+	if len(a) == 3 and a[0] == '00':
+		a.remove(0);
+
+	# if we have two or three bytes now, and the first character is a 0, remove it
+	if len(a) >= 2 and a[0][0:1] == '0':
+		a[0] = a[0][1];
+
+	result = ''
+	for item in a:
+		result += ('.' if result != '' else '') + item
+
+
+	result = 'v' + result
+
+	return result
+
+
+def get_free_space(path):
+	result = -1
+
+	try:
+		s = statvfs(path)
+		result = s.f_frsize * s.f_bavail     # Number of free bytes that ordinary users
+	except Exception as ex:
+		logger.info("Error while retrieving free space for path %s: %s" % (path, ex))
+
+	return result
+
+
+def _get_sysfs_machine_name():
+	try:
+		with open('/sys/firmware/devicetree/base/model', 'r') as f:
+			return f.read().rstrip('\x00')
+	except IOError:
+		pass
+
+	return None
+
+# Returns None if it cannot find a machine name. Otherwise returns the string
+# containing the name
+def get_machine_name():
+	# First try calling the venus utility script
+	try:
+		return check_output("/usr/bin/product-name").strip().decode('UTF-8')
+	except (CalledProcessError, OSError):
+		pass
+
+	# Fall back to sysfs
+	name = _get_sysfs_machine_name()
+	if name is not None:
+		return name
+
+	# Fall back to venus build machine name
+	try:
+		with open('/etc/venus/machine', 'r', encoding='UTF-8') as f:
+			return f.read().strip()
+	except IOError:
+		pass
+
+	return None
+
+
+def get_product_id():
+	""" Find the machine ID and return it. """
+
+	# First try calling the venus utility script
+	try:
+		return check_output("/usr/bin/product-id").strip().decode('UTF-8')
+	except (CalledProcessError, OSError):
+		pass
+
+	# Fall back machine name mechanism
+	name = _get_sysfs_machine_name()
+	return {
+		'Color Control GX': 'C001',
+		'Venus GX': 'C002',
+		'Octo GX': 'C006',
+		'EasySolar-II': 'C007',
+		'MultiPlus-II': 'C008',
+		'Maxi GX': 'C009',
+		'Cerbo GX': 'C00A'
+	}.get(name, 'C003') # C003 is Generic
+
+
+# Returns False if it cannot open the file. Otherwise returns its rstripped contents
+def read_file(path):
+	content = False
+
+	try:
+		with open(path, 'r') as f:
+			content = f.read().rstrip()
+	except Exception as ex:
+		logger.debug("Error while reading %s: %s" % (path, ex))
+
+	return content
+
+
+def wrap_dbus_value(value):
+	if value is None:
+		return VEDBUS_INVALID
+	if isinstance(value, float):
+		return dbus.Double(value, variant_level=1)
+	if isinstance(value, bool):
+		return dbus.Boolean(value, variant_level=1)
+	if isinstance(value, int):
+		try:
+			return dbus.Int32(value, variant_level=1)
+		except OverflowError:
+			return dbus.Int64(value, variant_level=1)
+	if isinstance(value, str):
+		return dbus.String(value, variant_level=1)
+	if isinstance(value, list):
+		if len(value) == 0:
+			# If the list is empty we cannot infer the type of the contents. So assume unsigned integer.
+			# A (signed) integer is dangerous, because an empty list of signed integers is used to encode
+			# an invalid value.
+			return dbus.Array([], signature=dbus.Signature('u'), variant_level=1)
+		return dbus.Array([wrap_dbus_value(x) for x in value], variant_level=1)
+	if isinstance(value, dict):
+		# Wrapping the keys of the dictionary causes D-Bus errors like:
+		# 'arguments to dbus_message_iter_open_container() were incorrect,
+		# assertion "(type == DBUS_TYPE_ARRAY && contained_signature &&
+		# *contained_signature == DBUS_DICT_ENTRY_BEGIN_CHAR) || (contained_signature == NULL ||
+		# _dbus_check_is_valid_signature (contained_signature))" failed in file ...'
+		return dbus.Dictionary({(k, wrap_dbus_value(v)) for k, v in value.items()}, variant_level=1)
+	return value
+
+
+dbus_int_types = (dbus.Int32, dbus.UInt32, dbus.Byte, dbus.Int16, dbus.UInt16, dbus.UInt32, dbus.Int64, dbus.UInt64)
+
+
+def unwrap_dbus_value(val):
+	"""Converts D-Bus values back to the original type. For example if val is of type DBus.Double,
+	a float will be returned."""
+	if isinstance(val, dbus_int_types):
+		return int(val)
+	if isinstance(val, dbus.Double):
+		return float(val)
+	if isinstance(val, dbus.Array):
+		v = [unwrap_dbus_value(x) for x in val]
+		return None if len(v) == 0 else v
+	if isinstance(val, (dbus.Signature, dbus.String)):
+		return str(val)
+	# Python has no byte type, so we convert to an integer.
+	if isinstance(val, dbus.Byte):
+		return int(val)
+	if isinstance(val, dbus.ByteArray):
+		return "".join([bytes(x) for x in val])
+	if isinstance(val, (list, tuple)):
+		return [unwrap_dbus_value(x) for x in val]
+	if isinstance(val, (dbus.Dictionary, dict)):
+		# Do not unwrap the keys, see comment in wrap_dbus_value
+		return dict([(x, unwrap_dbus_value(y)) for x, y in val.items()])
+	if isinstance(val, dbus.Boolean):
+		return bool(val)
+	return val
+
+# When supported, only name owner changes for the the given namespace are reported. This
+# prevents spending cpu time at irrelevant changes, like scripts accessing the bus temporarily.
+def add_name_owner_changed_receiver(dbus, name_owner_changed, namespace="com.victronenergy"):
+	# support for arg0namespace is submitted upstream, but not included at the time of
+	# writing, Venus OS does support it, so try if it works.
+	if namespace is None:
+		dbus.add_signal_receiver(name_owner_changed, signal_name='NameOwnerChanged')
+	else:
+		try:
+			dbus.add_signal_receiver(name_owner_changed,
+				signal_name='NameOwnerChanged', arg0namespace=namespace)
+		except TypeError:
+			dbus.add_signal_receiver(name_owner_changed, signal_name='NameOwnerChanged')

NodeRed/dbus-fzsonick-48tl/ext/velib_python/vedbus.py

@@ -0,0 +1,614 @@
+#!/usr/bin/env python3
+# -*- coding: utf-8 -*-
+
+import dbus.service
+import logging
+import traceback
+import os
+import weakref
+from collections import defaultdict
+from ve_utils import wrap_dbus_value, unwrap_dbus_value
+
+# vedbus contains three classes:
+# VeDbusItemImport -> use this to read data from the dbus, ie import
+# VeDbusItemExport -> use this to export data to the dbus (one value)
+# VeDbusService -> use that to create a service and export several values to the dbus
+
+# Code for VeDbusItemImport is copied from busitem.py and thereafter modified.
+# All projects that used busitem.py need to migrate to this package. And some
+# projects used to define there own equivalent of VeDbusItemExport. Better to
+# use VeDbusItemExport, or even better the VeDbusService class that does it all for you.
+
+# TODOS
+# 1 check for datatypes, it works now, but not sure if all is compliant with
+#	com.victronenergy.BusItem interface definition. See also the files in
+#	tests_and_examples. And see 'if type(v) == dbus.Byte:' on line 102. Perhaps
+#	something similar should also be done in VeDbusBusItemExport?
+# 2 Shouldn't VeDbusBusItemExport inherit dbus.service.Object?
+# 7 Make hard rules for services exporting data to the D-Bus, in order to make tracking
+#   changes possible. Does everybody first invalidate its data before leaving the bus?
+#   And what about before taking one object away from the bus, instead of taking the
+#   whole service offline?
+#   They should! And after taking one value away, do we need to know that someone left
+#   the bus? Or we just keep that value in invalidated for ever? Result is that we can't
+#   see the difference anymore between an invalidated value and a value that was first on
+#   the bus and later not anymore. See comments above VeDbusItemImport as well.
+# 9 there are probably more todos in the code below.
+
+# Some thoughts with regards to the data types:
+#
+#   Text from: http://dbus.freedesktop.org/doc/dbus-python/doc/tutorial.html#data-types
+#   ---
+#   Variants are represented by setting the variant_level keyword argument in the
+#   constructor of any D-Bus data type to a value greater than 0 (variant_level 1
+#   means a variant containing some other data type, variant_level 2 means a variant
+#   containing a variant containing some other data type, and so on). If a non-variant
+#   is passed as an argument but introspection indicates that a variant is expected,
+#   it'll automatically be wrapped in a variant.
+#   ---
+#
+#   Also the different dbus datatypes, such as dbus.Int32, and dbus.UInt32 are a subclass
+#   of Python int. dbus.String is a subclass of Python standard class unicode, etcetera
+#
+#   So all together that explains why we don't need to explicitly convert back and forth
+#   between the dbus datatypes and the standard python datatypes. Note that all datatypes
+#   in python are objects. Even an int is an object.
+
+#   The signature of a variant is 'v'.
+
+# Export ourselves as a D-Bus service.
+class VeDbusService(object):
+	def __init__(self, servicename, bus=None):
+		# dict containing the VeDbusItemExport objects, with their path as the key.
+		self._dbusobjects = {}
+		self._dbusnodes = {}
+		self._ratelimiters = []
+		self._dbusname = None
+
+		# dict containing the onchange callbacks, for each object. Object path is the key
+		self._onchangecallbacks = {}
+
+		# Connect to session bus whenever present, else use the system bus
+		self._dbusconn = bus or (dbus.SessionBus() if 'DBUS_SESSION_BUS_ADDRESS' in os.environ else dbus.SystemBus())
+
+		# make the dbus connection available to outside, could make this a true property instead, but ach..
+		self.dbusconn = self._dbusconn
+
+		# Register ourselves on the dbus, trigger an error if already in use (do_not_queue)
+		self._dbusname = dbus.service.BusName(servicename, self._dbusconn, do_not_queue=True)
+
+		# Add the root item that will return all items as a tree
+		self._dbusnodes['/'] = VeDbusRootExport(self._dbusconn, '/', self)
+
+		logging.info("registered ourselves on D-Bus as %s" % servicename)
+
+	# To force immediate deregistering of this dbus service and all its object paths, explicitly
+	# call __del__().
+	def __del__(self):
+		for node in list(self._dbusnodes.values()):
+			node.__del__()
+		self._dbusnodes.clear()
+		for item in list(self._dbusobjects.values()):
+			item.__del__()
+		self._dbusobjects.clear()
+		if self._dbusname:
+			self._dbusname.__del__()  # Forces call to self._bus.release_name(self._name), see source code
+		self._dbusname = None
+
+	def get_name(self):
+		return self._dbusname.get_name()
+
+	# @param callbackonchange	function that will be called when this value is changed. First parameter will
+	#							be the path of the object, second the new value. This callback should return
+	#							True to accept the change, False to reject it.
+	def add_path(self, path, value, description="", writeable=False,
+					onchangecallback=None, gettextcallback=None, valuetype=None, itemtype=None):
+
+		if onchangecallback is not None:
+			self._onchangecallbacks[path] = onchangecallback
+
+		itemtype = itemtype or VeDbusItemExport
+		item = itemtype(self._dbusconn, path, value, description, writeable,
+				self._value_changed, gettextcallback, deletecallback=self._item_deleted, valuetype=valuetype)
+
+		spl = path.split('/')
+		for i in range(2, len(spl)):
+			subPath = '/'.join(spl[:i])
+			if subPath not in self._dbusnodes and subPath not in self._dbusobjects:
+				self._dbusnodes[subPath] = VeDbusTreeExport(self._dbusconn, subPath, self)
+		self._dbusobjects[path] = item
+		logging.debug('added %s with start value %s. Writeable is %s' % (path, value, writeable))
+
+	# Add the mandatory paths, as per victron dbus api doc
+	def add_mandatory_paths(self, processname, processversion, connection,
+			deviceinstance, productid, productname, firmwareversion, hardwareversion, connected):
+		self.add_path('/Mgmt/ProcessName', processname)
+		self.add_path('/Mgmt/ProcessVersion', processversion)
+		self.add_path('/Mgmt/Connection', connection)
+
+		# Create rest of the mandatory objects
+		self.add_path('/DeviceInstance', deviceinstance)
+		self.add_path('/ProductId', productid)
+		self.add_path('/ProductName', productname)
+		self.add_path('/FirmwareVersion', firmwareversion)
+		self.add_path('/HardwareVersion', hardwareversion)
+		self.add_path('/Connected', connected)
+
+	# Callback function that is called from the VeDbusItemExport objects when a value changes. This function
+	# maps the change-request to the onchangecallback given to us for this specific path.
+	def _value_changed(self, path, newvalue):
+		if path not in self._onchangecallbacks:
+			return True
+
+		return self._onchangecallbacks[path](path, newvalue)
+
+	def _item_deleted(self, path):
+		self._dbusobjects.pop(path)
+		for np in list(self._dbusnodes.keys()):
+			if np != '/':
+				for ip in self._dbusobjects:
+					if ip.startswith(np + '/'):
+						break
+				else:
+					self._dbusnodes[np].__del__()
+					self._dbusnodes.pop(np)
+
+	def __getitem__(self, path):
+		return self._dbusobjects[path].local_get_value()
+
+	def __setitem__(self, path, newvalue):
+		self._dbusobjects[path].local_set_value(newvalue)
+
+	def __delitem__(self, path):
+		self._dbusobjects[path].__del__()  # Invalidates and then removes the object path
+		assert path not in self._dbusobjects
+
+	def __contains__(self, path):
+		return path in self._dbusobjects
+
+	def __enter__(self):
+		l = ServiceContext(self)
+		self._ratelimiters.append(l)
+		return l
+
+	def __exit__(self, *exc):
+		# pop off the top one and flush it. If with statements are nested
+		# then each exit flushes its own part.
+		if self._ratelimiters:
+			self._ratelimiters.pop().flush()
+
+class ServiceContext(object):
+	def __init__(self, parent):
+		self.parent = parent
+		self.changes = {}
+
+	def __getitem__(self, path):
+		return self.parent[path]
+
+	def __setitem__(self, path, newvalue):
+		c = self.parent._dbusobjects[path]._local_set_value(newvalue)
+		if c is not None:
+			self.changes[path] = c
+
+	def flush(self):
+		if self.changes:
+			self.parent._dbusnodes['/'].ItemsChanged(self.changes)
+
+class TrackerDict(defaultdict):
+	""" Same as defaultdict, but passes the key to default_factory. """
+	def __missing__(self, key):
+		self[key] = x = self.default_factory(key)
+		return x
+
+class VeDbusRootTracker(object):
+	""" This tracks the root of a dbus path and listens for PropertiesChanged
+	    signals. When a signal arrives, parse it and unpack the key/value changes
+	    into traditional events, then pass it to the original eventCallback
+	    method. """
+	def __init__(self, bus, serviceName):
+		self.importers = defaultdict(weakref.WeakSet)
+		self.serviceName = serviceName
+		self._match = bus.get_object(serviceName, '/', introspect=False).connect_to_signal(
+			"ItemsChanged", weak_functor(self._items_changed_handler))
+
+	def __del__(self):
+		self._match.remove()
+		self._match = None
+
+	def add(self, i):
+		self.importers[i.path].add(i)
+
+	def _items_changed_handler(self, items):
+		if not isinstance(items, dict):
+			return
+
+		for path, changes in items.items():
+			try:
+				v = changes['Value']
+			except KeyError:
+				continue
+
+			try:
+				t = changes['Text']
+			except KeyError:
+				t = str(unwrap_dbus_value(v))
+
+			for i in self.importers.get(path, ()):
+				i._properties_changed_handler({'Value': v, 'Text': t})
+
+"""
+Importing basics:
+	- If when we power up, the D-Bus service does not exist, or it does exist and the path does not
+	  yet exist, still subscribe to a signal: as soon as it comes online it will send a signal with its
+	  initial value, which VeDbusItemImport will receive and use to update local cache. And, when set,
+	  call the eventCallback.
+	- If when we power up, save it
+	- When using get_value, know that there is no difference between services (or object paths) that don't
+	  exist and paths that are invalid (= empty array, see above). Both will return None. In case you do
+	  really want to know ifa path exists or not, use the exists property.
+	- When a D-Bus service leaves the D-Bus, it will first invalidate all its values, and send signals
+	  with that update, and only then leave the D-Bus. (or do we need to subscribe to the NameOwnerChanged-
+	  signal!?!) To be discussed and make sure. Not really urgent, since all existing code that uses this
+	  class already subscribes to the NameOwnerChanged signal, and subsequently removes instances of this
+	  class.
+
+Read when using this class:
+Note that when a service leaves that D-Bus without invalidating all its exported objects first, for
+example because it is killed, VeDbusItemImport doesn't have a clue. So when using VeDbusItemImport,
+make sure to also subscribe to the NamerOwnerChanged signal on bus-level. Or just use dbusmonitor,
+because that takes care of all of that for you.
+"""
+class VeDbusItemImport(object):
+	def __new__(cls, bus, serviceName, path, eventCallback=None, createsignal=True):
+		instance = object.__new__(cls)
+
+		# If signal tracking should be done, also add to root tracker
+		if createsignal:
+			if "_roots" not in cls.__dict__:
+				cls._roots = TrackerDict(lambda k: VeDbusRootTracker(bus, k))
+
+		return instance
+
+	## Constructor
+	# @param bus			the bus-object (SESSION or SYSTEM).
+	# @param serviceName	the dbus-service-name (string), for example 'com.victronenergy.battery.ttyO1'
+	# @param path			the object-path, for example '/Dc/V'
+	# @param eventCallback	function that you want to be called on a value change
+	# @param createSignal   only set this to False if you use this function to one time read a value. When
+	#						leaving it to True, make sure to also subscribe to the NameOwnerChanged signal
+	#						elsewhere. See also note some 15 lines up.
+	def __init__(self, bus, serviceName, path, eventCallback=None, createsignal=True):
+		# TODO: is it necessary to store _serviceName and _path? Isn't it
+		# stored in the bus_getobjectsomewhere?
+		self._serviceName = serviceName
+		self._path = path
+		self._match = None
+		# TODO: _proxy is being used in settingsdevice.py, make a getter for that
+		self._proxy = bus.get_object(serviceName, path, introspect=False)
+		self.eventCallback = eventCallback
+
+		assert eventCallback is None or createsignal == True
+		if createsignal:
+			self._match = self._proxy.connect_to_signal(
+				"PropertiesChanged", weak_functor(self._properties_changed_handler))
+			self._roots[serviceName].add(self)
+
+		# store the current value in _cachedvalue. When it doesn't exists set _cachedvalue to
+		# None, same as when a value is invalid
+		self._cachedvalue = None
+		try:
+			v = self._proxy.GetValue()
+		except dbus.exceptions.DBusException:
+			pass
+		else:
+			self._cachedvalue = unwrap_dbus_value(v)
+
+	def __del__(self):
+		if self._match is not None:
+			self._match.remove()
+			self._match = None
+		self._proxy = None
+
+	def _refreshcachedvalue(self):
+		self._cachedvalue = unwrap_dbus_value(self._proxy.GetValue())
+
+	## Returns the path as a string, for example '/AC/L1/V'
+	@property
+	def path(self):
+		return self._path
+
+	## Returns the dbus service name as a string, for example com.victronenergy.vebus.ttyO1
+	@property
+	def serviceName(self):
+		return self._serviceName
+
+	## Returns the value of the dbus-item.
+	# the type will be a dbus variant, for example dbus.Int32(0, variant_level=1)
+	# this is not a property to keep the name consistant with the com.victronenergy.busitem interface
+	# returns None when the property is invalid
+	def get_value(self):
+		return self._cachedvalue
+
+	## Writes a new value to the dbus-item
+	def set_value(self, newvalue):
+		r = self._proxy.SetValue(wrap_dbus_value(newvalue))
+
+		# instead of just saving the value, go to the dbus and get it. So we have the right type etc.
+		if r == 0:
+			self._refreshcachedvalue()
+
+		return r
+
+	## Resets the item to its default value
+	def set_default(self):
+		self._proxy.SetDefault()
+		self._refreshcachedvalue()
+
+	## Returns the text representation of the value.
+	# For example when the value is an enum/int GetText might return the string
+	# belonging to that enum value. Another example, for a voltage, GetValue
+	# would return a float, 12.0Volt, and GetText could return 12 VDC.
+	#
+	# Note that this depends on how the dbus-producer has implemented this.
+	def get_text(self):
+		return self._proxy.GetText()
+
+	## Returns true of object path exists, and false if it doesn't
+	@property
+	def exists(self):
+		# TODO: do some real check instead of this crazy thing.
+		r = False
+		try:
+			r = self._proxy.GetValue()
+			r = True
+		except dbus.exceptions.DBusException:
+			pass
+
+		return r
+
+	## callback for the trigger-event.
+	# @param eventCallback the event-callback-function.
+	@property
+	def eventCallback(self):
+		return self._eventCallback
+
+	@eventCallback.setter
+	def eventCallback(self, eventCallback):
+		self._eventCallback = eventCallback
+
+	## Is called when the value of the imported bus-item changes.
+	# Stores the new value in our local cache, and calls the eventCallback, if set.
+	def _properties_changed_handler(self, changes):
+		if "Value" in changes:
+			changes['Value'] = unwrap_dbus_value(changes['Value'])
+			self._cachedvalue = changes['Value']
+			if self._eventCallback:
+				# The reason behind this try/except is to prevent errors silently ending up the an error
+				# handler in the dbus code.
+				try:
+					self._eventCallback(self._serviceName, self._path, changes)
+				except:
+					traceback.print_exc()
+					os._exit(1)  # sys.exit() is not used, since that also throws an exception
+
+
+class VeDbusTreeExport(dbus.service.Object):
+	def __init__(self, bus, objectPath, service):
+		dbus.service.Object.__init__(self, bus, objectPath)
+		self._service = service
+		logging.debug("VeDbusTreeExport %s has been created" % objectPath)
+
+	def __del__(self):
+		# self._get_path() will raise an exception when retrieved after the call to .remove_from_connection,
+		# so we need a copy.
+		path = self._get_path()
+		if path is None:
+			return
+		self.remove_from_connection()
+		logging.debug("VeDbusTreeExport %s has been removed" % path)
+
+	def _get_path(self):
+		if len(self._locations) == 0:
+			return None
+		return self._locations[0][1]
+
+	def _get_value_handler(self, path, get_text=False):
+		logging.debug("_get_value_handler called for %s" % path)
+		r = {}
+		px = path
+		if not px.endswith('/'):
+			px += '/'
+		for p, item in self._service._dbusobjects.items():
+			if p.startswith(px):
+				v = item.GetText() if get_text else wrap_dbus_value(item.local_get_value())
+				r[p[len(px):]] = v
+		logging.debug(r)
+		return r
+
+	@dbus.service.method('com.victronenergy.BusItem', out_signature='v')
+	def GetValue(self):
+		value = self._get_value_handler(self._get_path())
+		return dbus.Dictionary(value, signature=dbus.Signature('sv'), variant_level=1)
+
+	@dbus.service.method('com.victronenergy.BusItem', out_signature='v')
+	def GetText(self):
+		return self._get_value_handler(self._get_path(), True)
+
+	def local_get_value(self):
+		return self._get_value_handler(self.path)
+
+class VeDbusRootExport(VeDbusTreeExport):
+	@dbus.service.signal('com.victronenergy.BusItem', signature='a{sa{sv}}')
+	def ItemsChanged(self, changes):
+		pass
+
+	@dbus.service.method('com.victronenergy.BusItem', out_signature='a{sa{sv}}')
+	def GetItems(self):
+		return {
+			path: {
+				'Value': wrap_dbus_value(item.local_get_value()),
+				'Text': item.GetText() }
+			for path, item in self._service._dbusobjects.items()
+		}
+
+
+class VeDbusItemExport(dbus.service.Object):
+	## Constructor of VeDbusItemExport
+	#
+	# Use this object to export (publish), values on the dbus
+	# Creates the dbus-object under the given dbus-service-name.
+	# @param bus		  The dbus object.
+	# @param objectPath	  The dbus-object-path.
+	# @param value		  Value to initialize ourselves with, defaults to None which means Invalid
+	# @param description  String containing a description. Can be called over the dbus with GetDescription()
+	# @param writeable	  what would this do!? :).
+	# @param callback	  Function that will be called when someone else changes the value of this VeBusItem
+	#                     over the dbus. First parameter passed to callback will be our path, second the new
+	#					  value. This callback should return True to accept the change, False to reject it.
+	def __init__(self, bus, objectPath, value=None, description=None, writeable=False,
+					onchangecallback=None, gettextcallback=None, deletecallback=None,
+					valuetype=None):
+		dbus.service.Object.__init__(self, bus, objectPath)
+		self._onchangecallback = onchangecallback
+		self._gettextcallback = gettextcallback
+		self._value = value
+		self._description = description
+		self._writeable = writeable
+		self._deletecallback = deletecallback
+		self._type = valuetype
+
+	# To force immediate deregistering of this dbus object, explicitly call __del__().
+	def __del__(self):
+		# self._get_path() will raise an exception when retrieved after the
+		# call to .remove_from_connection, so we need a copy.
+		path = self._get_path()
+		if path == None:
+			return
+		if self._deletecallback is not None:
+			self._deletecallback(path)
+		self.remove_from_connection()
+		logging.debug("VeDbusItemExport %s has been removed" % path)
+
+	def _get_path(self):
+		if len(self._locations) == 0:
+			return None
+		return self._locations[0][1]
+
+	## Sets the value. And in case the value is different from what it was, a signal
+	# will be emitted to the dbus. This function is to be used in the python code that
+	# is using this class to export values to the dbus.
+	# set value to None to indicate that it is Invalid
+	def local_set_value(self, newvalue):
+		changes = self._local_set_value(newvalue)
+		if changes is not None:
+			self.PropertiesChanged(changes)
+
+	def _local_set_value(self, newvalue):
+		if self._value == newvalue:
+			return None
+
+		self._value = newvalue
+		return {
+			'Value': wrap_dbus_value(newvalue),
+			'Text': self.GetText()
+		}
+
+	def local_get_value(self):
+		return self._value
+
+	# ==== ALL FUNCTIONS BELOW THIS LINE WILL BE CALLED BY OTHER PROCESSES OVER THE DBUS ====
+
+	## Dbus exported method SetValue
+	# Function is called over the D-Bus by other process. It will first check (via callback) if new
+	# value is accepted. And it is, stores it and emits a changed-signal.
+	# @param value The new value.
+	# @return completion-code When successful a 0 is return, and when not a -1 is returned.
+	@dbus.service.method('com.victronenergy.BusItem', in_signature='v', out_signature='i')
+	def SetValue(self, newvalue):
+		if not self._writeable:
+			return 1  # NOT OK
+
+		newvalue = unwrap_dbus_value(newvalue)
+
+		# If value type is enforced, cast it. If the type can be coerced
+		# python will do it for us. This allows ints to become floats,
+		# or bools to become ints. Additionally also allow None, so that
+		# a path may be invalidated.
+		if self._type is not None and newvalue is not None:
+			try:
+				newvalue = self._type(newvalue)
+			except (ValueError, TypeError):
+				return 1 # NOT OK
+
+		if newvalue == self._value:
+			return 0  # OK
+
+		# call the callback given to us, and check if new value is OK.
+		if (self._onchangecallback is None or
+				(self._onchangecallback is not None and self._onchangecallback(self.__dbus_object_path__, newvalue))):
+
+			self.local_set_value(newvalue)
+			return 0  # OK
+
+		return 2  # NOT OK
+
+	## Dbus exported method GetDescription
+	#
+	# Returns the a description.
+	# @param language A language code (e.g. ISO 639-1 en-US).
+	# @param length Lenght of the language string.
+	# @return description
+	@dbus.service.method('com.victronenergy.BusItem', in_signature='si', out_signature='s')
+	def GetDescription(self, language, length):
+		return self._description if self._description is not None else 'No description given'
+
+	## Dbus exported method GetValue
+	# Returns the value.
+	# @return the value when valid, and otherwise an empty array
+	@dbus.service.method('com.victronenergy.BusItem', out_signature='v')
+	def GetValue(self):
+		return wrap_dbus_value(self._value)
+
+	## Dbus exported method GetText
+	# Returns the value as string of the dbus-object-path.
+	# @return text A text-value. '---' when local value is invalid
+	@dbus.service.method('com.victronenergy.BusItem', out_signature='s')
+	def GetText(self):
+		if self._value is None:
+			return '---'
+
+		# Default conversion from dbus.Byte will get you a character (so 'T' instead of '84'), so we
+		# have to convert to int first. Note that if a dbus.Byte turns up here, it must have come from
+		# the application itself, as all data from the D-Bus should have been unwrapped by now.
+		if self._gettextcallback is None and type(self._value) == dbus.Byte:
+			return str(int(self._value))
+
+		if self._gettextcallback is None and self.__dbus_object_path__ == '/ProductId':
+			return "0x%X" % self._value
+
+		if self._gettextcallback is None:
+			return str(self._value)
+
+		return self._gettextcallback(self.__dbus_object_path__, self._value)
+
+	## The signal that indicates that the value has changed.
+	# Other processes connected to this BusItem object will have subscribed to the
+	# event when they want to track our state.
+	@dbus.service.signal('com.victronenergy.BusItem', signature='a{sv}')
+	def PropertiesChanged(self, changes):
+		pass
+
+## This class behaves like a regular reference to a class method (eg. self.foo), but keeps a weak reference
+## to the object which method is to be called.
+## Use this object to break circular references.
+class weak_functor:
+	def __init__(self, f):
+		self._r = weakref.ref(f.__self__)
+		self._f = weakref.ref(f.__func__)
+
+	def __call__(self, *args, **kargs):
+		r = self._r()
+		f = self._f()
+		if r == None or f == None:
+			return
+		f(r, *args, **kargs)

NodeRed/dbus-fzsonick-48tl/start.sh

@@ -0,0 +1,7 @@
+#!/bin/bash
+
+. /opt/victronenergy/serial-starter/run-service.sh
+
+app=/opt/victronenergy/dbus-fzsonick-48tl/dbus-fzsonick-48tl.py
+args="$tty"
+start $args

NodeRed/rc.local

@@ -0,0 +1,26 @@
+#!/bin/bash
+
+mount -o remount,rw /
+
+# Source directory
+source_dir="/data/dbus-fzsonick-48tl"
+
+# Destination directory
+destination_dir_upper="/opt/victronenergy/"
+destination_dir="/opt/victronenergy/dbus-fzsonick-48tl/"
+
+# Check if the destination directory exists
+if [ -d "$destination_dir" ]; then
+    # Remove the destination directory
+    rm -r "$destination_dir"
+fi
+
+# Copy the contents of the source directory to the destination directory
+cp -r "$source_dir" "$destination_dir_upper"
+
+# Set MPPT network mode to 0
+# sed -i "s|('/Link/NetworkMode', [^)]*)|('/Link/NetworkMode', 0)|g" /opt/victronenergy/dbus-systemcalc-py/delegates/dvcc.py
+#sed -i "s|self._get_path('/Settings/BmsPresent') == 1|0|g" /opt/victronenergy/dbus-systemcalc-py/delegates/dvcc.py
+sed -i "s/self._set_path('\/Link\/NetworkMode', v)/self._set_path('\/Link\/NetworkMode', 0)\n self._set_path('\/Settings\/BmsPresent',0)/" /opt/victronenergy/dbus-systemcalc-py/delegates/dvcc.py
+
+exit 0

NodeRed/settings-user.js

@@ -0,0 +1,31 @@
+module.exports = {
+    uiHost:"",
+    /*  To password protect the Node-RED editor and admin API, the following
+        property can be used. See https://nodered.org/docs/security.html for details.
+    */
+    adminAuth: {
+        sessionExpiryTime: 86400,
+        type: "credentials",
+        users: [{
+            username: "admin",
+            password: "$2b$08$d7A0gwkDh4KtultiCAVH6eQ.tQUwVApq.tDVOOYQ51EpLIMbYy2GW",//salidomo
+            permissions: "*"
+        }]
+    },
+     
+    /*  Context Storage
+        The following property can be used to enable context storage. The configuration
+        provided here will enable file-based context that flushes to disk every 30 seconds.
+        Refer to the documentation for further options: https://nodered.org/docs/api/context/
+    */
+    //contextStorage: {
+    //    default: {
+    //        module:"localfilesystem"
+    //    },
+    //},
+    contextStorage: {
+    default: "memoryOnly",
+    memoryOnly: { module: 'memory' },
+    file: { module: 'localfilesystem' }
+    },
+    }