namespace InnovEnergy.Lib.Devices.Trumpf.TruConvertAc;

public enum AcDcGridType : UInt16
{
    GridTied400V50Hz = 0, // grid-tied,   400V, 50Hz
    GridTied480V60Hz = 1, // grid-tied,   480V, 60Hz
    Island400V50Hz = 2, // island mode, 400V, 50Hz
    Island480V60Hz = 3, // island mode, 480V, 60Hz
    GridTied380V60Hz = 4, // grid-tied,   380V, 60Hz
}

public enum PreChargeDcLinkConfig : UInt16
{
    External = 0, // device waits for external precharge of DC link
    Internal = 1, // device precharges external DC link to necessary start-up voltage

    InternalWithDc =
        2, // behaviour similar to 1 with additional support of DC submodules (necessary for island operation)

    InternalWithWait =
        3 // device precharges external DC link to necessary start-up voltage and waits until PrechargeDcLinkConfig gets set back to 1 or 2
}

public enum AcErrorPolicy : UInt16
{
    Relaxed = 0, // 0 = relaxed (System keeps running even if some slaves are in error state.) 
    Strict  = 1, // 1 = strict (System shuts down as soon as one component is in error state.)
}

public enum SymmetricAcOperationMode : UInt16
{
    //Configuration AC set values for phases L1 - L3
    Asymmetric = 0,
    Symmetric = 1,
}

public enum PowerFactorConvention : UInt16
{
    Producer = 0, // 0 = producer reference frame 
    Consumer = 1, // 1 = consumer reference frame
}

public enum SubSlavesErrorPolicy : UInt16
{
    Strict  = 0, // (AC-DC module switches to error state if at least one submodules is in error state 
    Relaxed = 1, // (AC-DC module switches to error state if all submodules are in error state.)
    Off     = 2, // (If possible AC-DC module continues operation even if all submodules are in error state.
}

public enum DcStageConfiguration : UInt16
{
    Off                = 0,  // DC module is off, power electronic circuit is deactivated, battery voltage can be measured.                                          
    Active             = 1,  // DC module is active and the power distribution according to parameters 4303 is active.                                               
    ActiveIndependent  = 2,  // DC module is active and operates independent from the AC module. The battery current set point from register 4500 is getting applied.
}
                                                                                                                                       
public enum AcDcDistributionMode : UInt16
{
    Power   = 0,  // power distribution
    Current = 1,  // current distribution
    Auto    = 2,  // auto
}